541352
43
Zoom out
Zoom in
Previous page
1/52
Next page
Qu-16 User Guide 43 AP9031 iss.3
8.12 Network Setup
Use this screen set the TCP/IP address for the Network
port. It is important that this address is compatible with
the addresses of equipment connected to the port, for
example a laptop providing MIDI control of mixer
parameters, or a wireless router providing remote
control using the Qu-Pad iPad app.
Typical setting is to enable DHCP as most wireless
routers will be set to allocate an IP address to the
mixer automatically.
8.13 Utility - Calibration
Use the routines here to calibrate the touch accuracy
of the Touch Screen and positional accuracy of the
Motor Faders.
Follow the on-screen instructions.
8.14 Utility – Qu-Drive
This screen lets you check and format a USB device
(key or hard drive) for use with Qu-Drive. Once
formatted you do not need to format it again.
Note – Formatting the USB device will erase all current
data on it. If you want to keep this then make sure you
archive the data elsewhere first.
Note – For reliable performance we recommend you
first format your USB device using the Qu mixer
Format utility. Once formatted use this with Qu only.
Do not use the device for other applications.
Note – Use a USB HDD (hard disk drive), not a key, for
Qu-Drive stereo and multitrack recording and
playback. A USB key can be used for data transfer but
is not recommended for audio.
Plug in the USB device. Wait for the mixer to read the
drive. The status window displays information about
the USB device:
File system: OK (no need to format)
File system: Unsupported (you need to format it)
Touch Format to start formatting. When complete, wait
a few seconds for the mixer to read the key. If
successful the status window will display ‘OK’.
Note – Do not remove the USB device or turn off
power while until formatting is complete.
For more information on working with USB refer to the
‘Understanding Qu-Drive and USB’ article in the Qu
Knowledgebase at www.allen-heath.com.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath QU-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath QU-16 in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info