541352
23
Zoom out
Zoom in
Previous page
1/52
Next page
Qu-16 User Guide 23 AP9031 iss.3
6.8 Mute Groups
The Qu features 4 Mute Groups. You can assign channels to a Mute Group so that pressing its master
key will instantly mute all assigned channels. For example, mute all drum channels, mute all mics on
stage during band changeover, or mute all FX returns between songs. Mute masters are accessed from
the Home or any Routing screen, or using the SoftKeys.
The following may be assigned to Mute Groups:
Mono and stereo Input Channels
FX Send masters
FX Return channels
Assigning a single channel
Press an input channel or FX send or return fader strip
Sel key and select the Touch Screen Routing screen.
Open the Mute Grp Assign tab. Use this screen to
assign the channel to any combination of the 4 Mute
Groups.
A green tick next to the button indicates that the Mute
Group master is available on the related SoftKey.
Assigning all channels
While in any Routing screen press the Fn key to open
the Mute Groups view.
Select the tab for the Mute Group you wish to assign.
All sources to that group are shown. Touch buttons to
toggle assignments on or off. Touch the Clear/Set All
button to turn off or on all the assignments.
Press the Fn key again to close the Mute Groups view.
6.9 Using the Mute Groups
There are 3 ways to use the Mute Groups:
Touch the master buttons on the Home screen.
While in any Routing screen press the Fn key to
open the Mute Groups view. Select the MG
Masters tab and touch the master buttons.
Assign and use one or more SoftKeys as Mute
Group masters. The Mute Groups are assigned to
SoftKeys with the same number as the group.
The Mute key will flash red if the channel is muted by a
Mute Group. A short flash shows it is muted by the
group only. A long flash shows it is muted by the Mute
key and a group.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath QU-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath QU-16 in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info