541363
39
Zoom out
Zoom in
Previous page
1/48
Next page
ML3000 User Guide 39
OSC/NOISE GENERATOR
WARNING: The generator is capable
of producing a high level continuous signal. To
avoid damage to the speakers check that the
generator and output levels are turned down
before you route the test signal to the outputs.
OSC/NOISE TRIM. Adjusts the level of the
oscillator or noise signal from –30 to +10dB.
OSC/NOISE SELECT. In its up position pink noise
is selected as the generator source. Press to select
the 1kHz test tone.
Pink noise. This is a constant level random noise
signal with equal energy per octave covering the full
audio bandwidth.
1kHz Oscillator. This produces a pure 1kHz tone
(sine wave) for single frequency testing and line up.
OSC/NOISE TO TB. Press this switch to route the
pink noise or 1kHz tone test signal to any
combination of LR, C and Grp/Aux outputs that
have their TB switches selected. The switch has a
latching action so that it can remain selected while
testing and calibrating the speakers.
DISABLE. Press the underpanel switch to disable
the osc/noise generator. This protects against
accidental operation during live performance.
Using the Osc/Noise Generator
Start with the TRIM control turned down. Select
either pink noise or the 1kHz tone as the test signal.
Check all the TB enable switches are correctly set
to route the signal to the required outputs. Make
sure the DISABLE switch is up (flush with the
panel). Press OSC/NOISE TO TB to route the
signal to the selected outputs. Raise the TRIM
control and output faders to achieve the level
required. The test signal should register on the
console meters in the normal way.
Use pink noise to test the speakers for correct
operation. This is made up of the full audio
bandwidth and can test all the drivers at the same
time. Used with a reference microphone and RTA
(real time analyser) you can check the venue
acoustics for frequency response.
Use the 1kHz tone to check matching and line up
between equipment by adjusting input and output
levels using the meters as the reference.
When you have finished using the generator be
sure to disable it if you want to avoid the possibility
of accidental operation during performance.
OSC/NOISE
1kHz OSC
PINK NOISE
Disable
TO TB
min max
OSC/NOISE
TRIM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info