541379

Allen-Heath MixWizard WZ4-16 Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
Allen & Heath 14 WZ
4
16:2 and 12:2 User Guide
L, R, M OUT The main console mix outputs are on balanced XLR. These produce
+4dBu when the meters read ‘0’. The M output can be switched to provide a mono
sum of the post-fade L and R signals, or the AUX6 output.
The L and R outputs typically feed the house PA system in live sound mixing, or a 2-
track recorder in studio mixing. In mono mode, the M output can provide an addition-
al feed for a mono fill speaker or zone, or be used as the main feed into a mono PA.
Used with a mono PA the L and R mix can provide a pair of subgroups, each with rout-
ing using the channel PAN controls, inserts and faders. Configured to provide the
AUX6 mix, the M output is ideal for driving a sub bass speaker system when working
with an ‘aux fed subs’ PA. This provides the sub feed with its own per-channel mix on
balanced XLR and with dedicated fader alongside the main LR faders for proper control
of the house volume.
AB OUT A pair of impedance balanced TRS jacks can be configured to provide an
additional LR mix or engineers monitor send. These operate at -2dBu line level. A
front panel recessed ‘mode’ switch determines the source to the AB output. This may
be set to follow the console monitor system and therefore feed an independent local
stereo monitor or even engineers wedge speaker. When set to follow the LR mix, the
factory default source is taken post LR fader. An internal option jumper is available to
change this to pre LR fader.
The unique AB output feature provides the MixWizard with a host of possibilities…
independent 2-track recording feed, broadcast feed, zone and delay fill feeds, local
monitor, engineers wedge monitor and more.
AUX OUT 1-6 Each aux send is available on an impedance balanced TRS jack oper-
ating at -2dBu line level. An internal option is available to fit a balanced line driver IC
to provide an electronically balanced output operating at +4dBu. Note that it is not
usual to require this option as the impedance balanced standard drive provides signifi-
cant interference rejection when feeding balanced equipment inputs.
The aux sends are typically used to feed stage monitors, effects devices such as reverb
and delay, and for special mix requirements.
FOOTSWITCH Mutes and unmutes the ST5 (ST1) effects return channel, ideal for
bypassing the effects between songs. Note that this affects the internal processor and
also any external effects device that may be plugged in to these return inputs. Use a
momentary or latching footswitch as required. Shorting a TS or TRS jack tip to sleeve
turns the mute on.
USB II OPTION A blank plate is fitted here as standard. The USB II option kit is
available from Allen & Heath. Refer to OPTIONS later in this guide.
Footswitch
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath MixWizard WZ4-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath MixWizard WZ4-16 in the language / languages: English as an attachment in your email.

The manual is 5,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info