Manual Allen-Heath iDR-8 (page 28 of 47) (English)

541382

Zoom out

Zoom in

1/47

28 IDR-8 User Guide

Monitor Inputs and Outputs

Monitor TRS Input and Output The monitor is

available as a line level signal on the rear panel. A pair of TRS

jack sockets accept an external stereo source as the input, and

another pair present the stereo output. The L and R signals

have separate sockets. Maximum level available is +18dBu.

Decide the normal operating level according to headroom

required. Typical level is 0 or +4dBu. Each TRS socket is

differentially balanced and wired tip hot (+), ring cold (-) and

sleeve ground. To use these with unbalanced equipment link

the ring to the sleeve.

Monitor Headphones Output This follows the

TRS monitor output signals. Plug stereo headphones into the

front panel socket. We recommend that you use high quality

closed ear headphones from 30 to 600 ohms impedance.

Adjust the level trimmer using a flat bladed implement such as

a screwdriver. It can be accessed with the face plate on or off.

In most cases re-adjustment should not be necessary once the

unit is installed and operated normally.

Using the monitor Plug headphones into the front

socket. Connect the rear panel line outputs into a stereo

amplifier driving monitor loudspeakers. You can select the

source to monitor in three ways:

1. Front panel Setup menu *7 With the face plate removed,

press and hold the MENU key until the Setup menus are

accessed. Press ENTER to scroll through until menu *7

Monitoring is displayed. Press the scroll keys to select the

input or output, the channel number and the point in the signal

path you want to listen to. These are shown in the table earlier

in this user guide. Once selected you should hear the signal in

the monitor.

 iDR System Manager Open the Monitor Settings

window. There are three options:

O Follow Mouse / Active Window – Move the mouse over the

active windows. It automatically selects the signal associated

with any box that has meters in its display to the monitor bus.

O Independent Outputs – Assigns the headphones and

monitor sockets as additional channel outputs instead of audio

monitor. Do not tick this if you want to use the monitor

function.

O Manual Select – Manually enter the channel number and

point you want to listen to.

3. Patch recall The manually selected monitor settings can

be stored in the patches. You could assign patch recalls to the

soft keys so that the monitor is selected from front panel or

remote keys for normal day-to-day operation.

TRIM

LEVEL

*** Setup ***

*7 Monitoring

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iDR-8 in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allen-Heath iDR-8 Manual

Product: