541385
5
Zoom out
Zoom in
Previous page
1/12
Next page
iDR MixRack Getting Started Guide 5 AP7445 iss.3
Front Panel
Mic/Line inputs High performance, recallable
analogue preamps for balanced or unbalanced
microphone and line level signals. Gain, Pad
and 48V are digitally controlled within the
preamp. Digital Trim and Polarity is available
within the DSP channel.
Inputs are identified by Slot (card position) and
Socket (number), for example A1 or C8. Any
input can be patched to any DSP channel
using the PREAMP screen.
Line outputs Line level, balanced XLR
outputs. Nominal level +4dBu with +22dBu
maximum providing +18dB headroom.
iLive signals can be patched to any output
socket using the OUTPUTS screen. The
outputs are relay protected to prevent power
on or off thumps.
PL-Anet RS485 connection for Allen & Heath
PL Series remote controllers. Several may be
daisy chained together or routed individually
via the PL-9 PL-Anet hub. PL controls can be
assigned using the SURFACE SETUP screen
or Editor software.
MIDI IN and OUT sockets.
MIDI is tunnelled via ACE™
or Network to the MIDI port
at the Surface. For more
information about MIDI
refer to the iLive MIDI
Specification.
Network Built-in 3 port switch. Connect one or more laptops
running iLive Editor, a wireless router, other iLive systems or
external network, or link control to a Surface not equipped
with ACE™. All devices on the network must have
compatible TCP/IP addresses. A recessed switch lets you
reset the network settings to factory default.
ACE™ MixRack to Surface link Also used when linking a
Slave MixRack to a Master in Dual-Rack expansion mode. A
single CAT5 cable links audio and control. You do not need
a separate Network cable because control is bridged over
the ACE™ cable between MixRack and Surface.
PHONES ¼” stereo socket and level control
for the built-in headphone amplifier. The
output follows the PAFL selection.
Port B audio network option slot Fit one of
the option cards available for system
expansion, digital mic splitting and distributed
audio networking. Capable of bi-directional 64
channels, 48kHz sampling rate. Current
options include ACE™, EtherSound, MADI,
MMO. Refer to the A&H web site for more on
available options.
SYSTEM LOC
K
indicates MixRack digital audio
sync lock.
Rack Ears Fit into a 19”
rack or flightcase.
PL-9 hub
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iDR-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iDR-48 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info