541367
24
Zoom out
Zoom in
Previous page
1/32
Next page
GLD User Guide 24 AP8561 iss.2
Working with the Mix on the fader strips
Press a Main Mix master strip Mix key.
This is the normal mixing mode. The Input strips
present the channel faders. The Master strips
present the master mix faders.
Hold down the Assign key and press channel
Mix keys to assign or de-assign them from the
main mix. Current ON status is displayed on the
lower part of the strip LCDs.
Mix
Aux3
Mix
IP 1 IP 2 IP 3 IP 4 IP 5 IP 6 IP 7 IP 8 Aux1 Aux2
LR
Channel faders Master faders
+ press Mix
ON
Normal mix mode (FOH)
Assign Routing
Main Mix active
hold
down
Press a Mix master strip Mix key.
Use this to work with Aux and FX sends. The
Input strips change to present all the send levels
to the selected mix. The Master strips present
the master mix faders.
Hold down the Assign key and press channel
Mix keys to assign or de-assign them from the
selected mix.
Hold down the Pre/Post key and press channel
Sel keys to toggle each source pre or post fader.
Current PRE status is displayed on the lower part
of the channel strip LCDs.
You can quickly set all assignments on or off, or
all sources pre or post fader by pressing the
Master strip Mix or Sel key instead of a channel
key as described above.
All sends to one master Master faders
Aux3
Sel
Mix
IP 1IP 2IP 3IP 4 IP 5IP 6IP 7IP 8 Aux1
Aux2
+ press Mix Assign Routing
ON
all
+ press Sel Pre/Post
PRE
Master Mix
all
Aux4
view
Access Aux, FX, Matrix mix on faders
hold
down
Press an Input Channel strip Mix key.
Use this to work with Aux and FX sends. The Input
strips remain as Channel Faders. The Master
strips change to present all sends from the
selected channel.
Hold down the Assign key and press master Mix
keys to assign or de-assign the channel from each
mix.
Hold down the Pre/Post key and press master Sel
keys to toggle the channel pre or post fader to each
mix. Current status is displayed on the master strip
LCDs.
IP 6IP 7IP 8 Aux1Aux2
ONPRE
Channel faders
Aux3
Sel
Mix
Channel Mix
Assign Routing
Pre/Post
Aux4
All sends from one input
view
IP 5
IP 4
hold
down
Press a Group Master strip Mix key.
Use this to assign channels to the Audio and DCA
groups. The Input and Master faders are not
affected.
Hold down the Assign key and press channel Mix
keys to assign or de-assign the channels from the
group.
IP 4 IP 5 IP 6 IP 7 IP 8 Grp1 Grp2
+ press Mix all
DCA
Mix
DCA and Audio Group assign
Assign
DCA2
ON
DCA
1
hold
down
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GLD Digital Audio Mixing System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GLD Digital Audio Mixing System in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info