541345
38
Zoom out
Zoom in
Previous page
1/42
Next page
38 GL2800 User Guide
Aux pre/post EQ
For convenience, this option
is a recessed front panel switch per channel. No
internal access is required. The up position is post-
EQ, pressed is pre-insert and pre-EQ. Note that this
setting affects all pre-fade sends from the channel,
including auxes and direct output.
Direct output source Factory default is pre-
fader. This is common for live recording to
multitrack. The live mix fader movements do not
affect the recording. Move the jumper from PR to
PO to change to post-fade. Post-fade is appropriate
when using the output as a direct channel effects
send.
Channel Aux pre/post settings Factory
default is Aux 1-4 = switched, Aux 5-8 = switched,
Aux 9-10 = switched pre/post fader. You can
change the setting of Aux 1-2 from switched to
permanently pre-fade or post-fade if preferred.
Make sure you set all mono and stereo channels the
same. To avoid possible future confusion when the
console is used by other operators, we recommend
you only change these settings if absolutely
necessary.
Return Aux pre/post settings The stereo
returns feed Auxes 1, 2 and 9-10. Factory default is
the post-fader so that the fader becomes a master
for all feeds from the return. This may be changed
to pre-fade if you prefer. Move the two jumpers from
G to F.
Talkback mic +48V Factory default is +48V
phantom power turned on for the front panel
talkback mic XLR input. The option jumper is behind
the TB mic XLR on the L Master board. If you prefer,
phantom power can be disabled by repositioning the
jumper to the OFF position.
Note that phantom power should not harm non-
powered dynamic microphones as long as balanced
connections are used.
WARNING: Do not connect unbalanced
sources or cables to inputs with phantom power
selected. To avoid loud clicks do not press the
TALK switch when plugging or unplugging the
talkback microphone.
CN4
SW=SWITCHED
EDCBA
JUMPER
PO=POSTFADE
PR=PREFADE
AUX 1-2
PR
SW
PO
PO
PR
DIR OUT
CN4
SW=SWITCHED
EDCBA
JUMPER
PO=POSTFADE
PR=PREFADE
AUX 1-2
PR
SW
PO
PO
PR
DIR OUT
JP1
EDC
JUMPER
SW=SWITCHED
PO=POSTFADE
PR=PREFADE
AUX 1-2
PR
SW
PO
MONO CHANNEL
CN4
PO PR
PR=PREFADE
PO=POSTFADE AUX 1-2/9-10
GG FF
JP2
JP1
OFF
ON
+48V
MONO CHANNEL
STEREO CHANNEL
STEREO RETURN
L MASTER
AUX
3
OO +6
PRE-EQ
AUX
2
PRE-EQ
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2800 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info