541345

Allen-Heath GL2800 Manual

19
Zoom out
Zoom in
Previous page
1/42
Next page
GL2800 User Guide 19
The STEREO Return Channel
Two additional dual stereo return channels are provided. Each has
two stereo line inputs which can be mixed together or used
separately. ST1 and ST3 can be routed directly to LR instead of the
return channels. This gives you the flexibility of mixing in four more
stereo sources in a small panel space.
ST1 INPUT A level control adjusts from fully off to +16dB gain.
The L input signal is normalled through the R input socket so that a
mono source may be plugged in to feed both left and right sides of the
stereo channel. A recessed switch can be set to route the source
directly to the L-R mix instead of the return channel. Use a pointed
object to change the switch setting.
ST2 INPUT
A level control adjusts from fully off to +16dB gain.
The L input signal is normalled through the R input socket so that a
mono source may be plugged in to feed both left and right sides of the
stereo channel.
AUX SENDS Use these controls to feed the return signal to a
combination of the auxes. The stereo signal is summed to feed Aux 1
and Aux 2 in mono. The signal feeds aux 9-10 in stereo. Internal
jumper options are provided to set the auxes pre or post-fader. Default
setting is post-fade so that the fader provides master control for all the
sends.
MUTE When pressed, all the channel pre and post-fade signals are
turned off except ST1 or ST3 if routed direct to LR.
PFL Press PFL to display the summed L+R pre-fade channel signal
on the monitor meters and listen to it in the headphones and local
monitor without affecting the main outputs.
ROUTING Routes the left signal to L and odd group 1 or 3, and the
right signal to R and even group 2 or 4, and sums L and R to feed the
M mix in mono. Return channel ST1-2 can be routed to Groups 1-2,
and ST3-4 can be routed to Groups 3-4.
FADER A 60mm stereo fader provides +10dB maximum boost
above its normal unity gain 0dB position.
Applications for the stereo channels and returns are described later in
this user guide.
30
OO
5
20
10
0
5
10
DUAL STEREO RETURN
STEREO
STEREO
ST4
ST3
MUTE
DIRECT TO
LR
GAIN
L-R
3-4
M
GAIN
+6
9-10
AUX
2
AUX
1
AUX
OO
+6OO
+6OO
PFL
-10
-20
10
16
-5
0
5
OO
-10
-20
10
16
-5
0
5
OO
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2800 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info