541356
8
Zoom out
Zoom in
Previous page
1/54
Next page
7
SPECIFICATIONS
0dBu = 0.775 Vrms Reference for high level equipment +4dBu = 1.23 V
0dBV = 1 Vrms Reference for low level equipment -10dBV = 310 mV
0VU meter reading = +4dBu at XLR outputs
INPUT GAIN
Mic/Line Input ................. +6dB to +60dB variable
Mic/Line + Pad ............... -14dB to +40dB variable
Line Input ....................... -14dB to +40dB variable
Stereo Line Input ............ off to +10dB variable
2-track Return ................ off to +10dB variable
MAXIMUM OUTPUT LEVEL
Main Outputs .................. +27dBu into load of >600 ohm
Jack Outputs .................. +21dBu into load of >2K ohm
Internal headroom .......... +21dB
FREQUENCY RESPONSE
Measured 20Hz to 20kHz ref 1kHz
Mic to mix (+40dB) ......... +0/-0.5dB
Line to mix (0dB) ............ +0/-0.5dB
DISTORTION
THD + noise measured @ 1kHz +20dBu
Mic to mix (+40dB) ......... 0.006%
Line to mix (0dB) ............ 0.006%
CROSSTALK
Referred to driven channel @ 1kHz
Channel to channel ........ > 100dB
Mute shutoff ................... > 85dB
Fader shutoff .................. > 90dB
NOISE PERFORMANCE
Measured rms 22Hz to 22kHz bandwidth
Mic EIN........................... -128dB 150 ohm source
Line pre-amp (0dB) ........ < -91dBu
Residual output noise ......................... < -98dBu (-102dB S/N)
Mix noise, nothing routed ................... < -87dBu (-91dB S/N)
Mix noise, 24 channels routed ............ < -81dBu (-85dB S/N)
METERING
Input meters ................... 4 segment LED (signal, 0, +6, peak)
Mix meters ...................... 4 segment LED (signal, 0, +6, peak)
Output meters ................ 12 segment LED
LED meter response ...... peak reading
Peak indicators ............... on 5dB before clipping
Signal indicators ............. on -20dBu
Meterpod ........................ Illuminated VU moving coil meters
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info