541351
17
Zoom out
Zoom in
Previous page
1/20
Next page
GL3300 USER GUIDE
17
LAMP
Plug in a 12V gooseneck lamp to provide illumination of the control
panel. This should be a BNC connector type.
Individual jack sockets are provided for left and right inputs (returns)
from and outputs (sends) to a stereo recorder such as a DAT or
cassette machine.
Alternatively the RETURN may be used for stereo intermission
replay from a CD or similar to the main mix by pressing L-R. An
LED warns that replay is on.
The SEND may be used for recording the performance in stereo, or
to feed alternative speakers, drive an induction loop hearing aid
system, or to feed a stereo broadcast etc. The send is connected post
L-R faders as standard.
Separate send and return level controls adjust the signal to the
required line level and sensitivity. The console can work with both
high (+4dBu) and low (-10dBV) level equipment.
2-TRACK
Plug in stereo headphones (30 to 600 ohms recommended) under the
armrest. Adjust the LEV control for comfortable listening level.
The phones and 12 segment bargraph meters normally monitor the
post-fade L-R mix. Press 2-TRK to monitor the return from a stereo
recorder if connected.
Pressing AFL anywhere on the console automatically overrides the
monitor with the selected AFL signal. Pressing PFL overrides both
the monitor source and any selected AFL. This feature lets you listen
to an AFL source, group for example, and check channel signals
simply by pressing and releasing the required PFL buttons. PFL or
AFL selected is indicated by means of a large red LED above the
meters.
MONITOR MODE
Press the mode switch for STAGE MONITOR application. The
mono out XLR now feeds the monitor engineers 'listen wedge'
speaker. It is advisable that the same type of loudspeaker is used for
this as those used for the stage monitors themselves.
Select your required application: LR sum mono out FOH, or AFL
interrupted by PFL, STAGE MONITOR.
PHONES MONITOR
L,R,M OUTPUTS
The main L and R outputs are individually controlled on two 100mm
long throw faders. The outputs are balanced XLR to drive long cable
runs. INSERT points are provided so that signal processors such as
compressors or limiters may be patched into the signal path.
Left and right signals are summed together to feed the balanced XLR
MONO output which may be used to feed a centre fill speaker system,
provide a mono broadcast or recording feed, or work a mono PA with
capability for stereo recording. The MONO output is post fade but can
be set pre-fade by changing internal link options.
LR SUM
AFL /PFL
FOH
ON STAGE
MONITOR
2
GROUP
MUTE
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 3300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 3300 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info