541351
7
Zoom out
Zoom in
Previous page
1/20
Next page
GL3300 U
G
UIDE
7
8 MONO INPUT CHANNEL EXPANDER
OPTIONS & ACCESSORIES
There are a range of options and accessories available for the GL3300 range. All are supplied complete
with fixings and installation and operating instructions. Contact your nearest Allen & Heath dealer if you
wish to purchase an option or accessory.
VU meterbridge
The VU meterbridge is designed for use in all lighting conditions and monitors Groups (Aux) 1-8, Left,
Right and Mono/PFL signal levels. It fits onto the rear extrusion beam of the console and is full length.
The meterbridges are available in 3 sizes. Please note, there is no meterbridge option avaiable for the 16
channel frame.
M
SM
GL3300-M24 VU METERBRIDGE Order Code: GL3300-M24
To fit GL3300 24 input channel console
GL3300-M32 VU METERBRIDGE Order Code: GL3300-M32
To fit GL3300 32 input channel console
GL3300-M40 VU METERBRIDGE Order Code: GL3300-M40
To fit GL3300 40 input channel console
Expander
The GL3300 can be expanded up to a maximum of 40 input channels. The expander is an 8 channel wide
bolt on module with full function input channels and soft armrest.It can be fitted to the left or right hand
side of the console depending on the console format. The expanders are available in 4 different formats.
Order Code: GL3300-8M
8 STEREO INPUT CHANNEL EXPANDER
S
Order Code: GL3300-8S
4 MONO & 4 STEREO INPUT CHANNEL EXPANDER
Order Code: GL3300-4MS
MS
4 STEREO & 4 MONO INPUT CHANNEL EXPANDER
Order Code: GL3300-4SM
SYS-LINK Buss Expander Kit
The SYS-LINK expander option allows console to console interconnection by means of just two cables.
By connecting two GL3300 consoles together or to any other A&H console fitted with the SYS-LINK
option, the number of input channels can be increased. One console acts as a channel expander (slave)
to the second (master). Please note, the SYS-LINK option kit requires the installation and wiring of a
circuit board (PCB) assembly and should only be fitted by technically competent service personnel
SYS-LINK BUSS EXPANDER KIT Order Code: GL3300-SL1
(for one console only)
8 Group Output option Kit
The 8 Group Output option allows direct access to all 8 groups in the console. This is in addition to group
outputs 5-8 on XLR connectors on the rear panel. This option uses one of the SYS-LINK connector
mounting holes and may need to be repositioned if the SYS-LINK option is already fitted. Please note,
the 8 Group Output option kit requires the installation and wiring of a circuit board (PCB) assembly and
should only be fitted by technically competent service personnel
8 GROUP OUTPUT OPTION KIT Order Code: GL3300-8GD
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 3300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 3300 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info