Manual Alinco E (page 49 of 52) (English)

53524

Zoom out

Zoom in

1/52

Appendix

Troubleshooting

Please check the list below before concluding the DJ-X3 is faulty. If a problem

persists, reset the DJ-X3. This can sometimes correct erroneous operation.

Symptom Possible Cause Action

Recharge or exchange batter-

ies.

Check the "+" and "-" orienta-

tion

Remove dirt in/on the battery

case

Adjust the volume

Remove the earphone

Adjust the squelch level or

turn off

Turn the power off, then on (If

unit does not recover, reset)

Recharge or exchange batter-

ies

Adjust the squelch level or

turn off

Turn the Attenuator OFF

Check the type of antenna,

and then switch

Change the tuning step, and

adjust the frequency

Select the suitable modula-

tion mode

Recharge or exchange batteries

Turn OFF keylock

Set the squelch value higher

to cut the noise off

Program upper and lower lim-

it properly

Dead battery

Incorrect position of

battery

Poor contact with the

battery case and tran-

sceiver terminals

Volume too low

Earphone connected

Squelch closed

Incorrect operation of

CPU

Battery exhausted

Squelch level too high

Attenuator is ON

Incorrect antenna selection

(WHIP, EAR, ABAR, SBAR)

Incorrect frequency

Incorrect modulation

mode

Dead battery

Keylock is ON

Squelch opens

Incorrect programmed

edge in Program scan

Cannot turn the

power on

No speaker audio

Abnormal display

or operation

Low sensitivity

Unclear sound

Cannot set the

frequency etc.

Cannot scan

Cannot execute

Program scan

Chapter

Appendix

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alinco E in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alinco E Manual

Product: