Manual Alinco E (page 10 of 52) (English)

53524

Zoom out

Zoom in

1/52

■

Battery Recharger

· Recharging with the EDC-105

1. Mount NiMH battery pack on the

transceiver. (The NiMH battery

pack can also be placed in the

battery recharger.)

2. Connect AC adapter plug to the

battery recharger.

3. Select position 1 to 3 with the lever

on the recharger and adjust the

battery pack to fit in it. (According

to different types of battery packs,

the position of the lever changes.)

4. Set the battery pack in the

recharger making contact with

terminals on the rear side of the

transceiver and those on the

recharger.

5. Connect the power plug to the AC

outlet.

6. The red light on the recharger

goes on and starts to recharge the

battery. (While connected to the

AC outlet, the charge is

maintained.)

Caution!

· When battery temperature exceeds a certain level, a protective function

operates automatically and turns off the charge. (The red light goes off.)

Should this happen, unplug the recharger and dismount the transceiver or

the battery pack immediately. After removing the cause of the problem,

you may resume use of the battery recharger.

· Turn the transceiver power off before recharging the battery pack.

· Disconnect the EDC-105 from the outlet while not using it.

· Never charge the battery packs of other manufacturers with this charger.

· The required recharging time depends on the condition and model of a

battery pack, but it may take at most 10 hours. Refer to the instruction

manual of the battery pack.

· Never short-circuit the recharging terminals of this recharger with metal

objects, etc. The charger can be damaged.

· The ECD-105 does not work when the voltage from the wall outlet is

extremely low.

AC adapter plug

Terminals

(rear side)

Terminals

on the rechager

Lever(1 3)

Power plug

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alinco E in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alinco E Manual

Product: