802066
16
Zoom out
Zoom in
Previous page
1/22
Next page
3.8.3 Het laadstation op de sokkel monteren
3
2
1
1
2
3
Figuur 3.2: Explosietekening van het laadstation dat op de sokkel moet worden
gemonteerd
1. Monteer de 4 meegeleverde draadstangen M10x80
mm in de sockets op de sokkel (zie positie 1 in
afbeelding 3.2).
2. Breng de pakking aan over de draadeinden en de
afdichtingsplaat (zie positie 2 in de afbeelding).
3. Plaats het laadstation op de sokkel over de uiteinden
van de draden en over de stroomkabel en grondkabel.
4. Knip de kabeldoorvoer op maat, zodat de
voedingskabel stevig op zijn plek blijft.
5. Leid de voedingskabel door de bodemplaat. Trek de
voedingskabel naar de buitenzijde van het laadstation
om de bijgeleverde trekontlasting te monteren.
6. Monteer de trekontlasting.
7. Trek de voedingskabel terug in het laadstation/de
sokkel. Zorg dat er 250 mm van de kabel achterblijft in
het laadstation.
8. Bevestig het laadstation op de sokkel zoals
weergegeven in de afbeelding met de 4 meegeleverde
M10-moeren inclusief sluit- en V-ringen.
9. Bevestig het laadstation met 4 x tapbouten M10x80
mm op de sokkel.
3.9 Elektrische installatieprocedure
1. Verwijder de mantel van de voedingskabel met een
stanleymes en verwijder de mantels van de losse
draden met een draadstriptang.
2. Sluit de aardingspen aan.
3. De aardmantel/aarddraad van de netbeheerder
mag alleen na schriftelijke toestemming van de
netbeheerder als aardingsvoorziening beschouwd
worden.
4. Afhankelijk van uw installatievereisten moet u ervoor
zorgen dat de aardingsweerstand van het systeem op
een van de volgende waarden wordt ingesteld:
a. <100Ohm (vereist door EV/ZE Ready 1.4I-
certificering);
b. <167Ohm (vereist door Nederlandse NEN1010-
richtlijn);
c. volgens de waarden vermeld in de wettelijke
voorschriften van uw land.
5. Koppel het laadstation, volgens de productvariant, los
van de spanningsbron:
a. Zorg dat de hoofdschakelaar in de UIT-stand (0)
staat, of
b. Zorg dat de hoofdaardlekschakelaar (RCCB) in de
UIT-stand (0) staat
6. Koppel het laadstation, volgens de productvariant, los
van de spanningsbron:
a. Verwijder de zekeringen uit de kast van de
distributienetbeheerder van het laadstation, of
b. Zet de stroomonderbrekers (MCB) in de UIT-stand
(0);
7. Afhankelijk van productvariant:
a. Verbind de draden van de fasen met de
zekeringhouders, of
b. met de stroomonderbrekers (MCB) in de kast van
de distributienetbeheerder van het laadstation,
inclusief standaardnetaansluiting. (PE op aparte
rail)
8. Sluit de meegeleverde kabelklem aan op de
meegeleverde plaat aan de achterwand in het
laadstation (zie afbeelding 2.2 en 2.3 positie 7). Zorg
voor trekontlasting op de kabel.
3. INSTALLEREN EN AANSLUITEN
Alfen ICU B.V. | Installatie- en gebruikershandleiding | Twin 5 | Laadstations elektrische auto's | V1.2 | NL | 10/2022 | 203130172-ICU
14
NL
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfen Twin 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfen Twin 5 in the language / languages: Dutch as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info