802068
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
Suspend Charging mode installation guide | Version 1.0 | July 2019
ENGLISH
4.2 Installation and conguration procedure
1. Verifythetypeofcontactintheenergymeterofthegridoperator(NOorNCcontact).
2. AdjustthechargingstationcongurationtoSuspendChargingmodebeforecontinuingtheinstallation.
Checkthecongurationchapterhowtocongurethechargingstation.
3. Dependingonthechosencongurationsetting,followthetestprocedureasshownbelow:
4. When the test is done successfully, the data cables can be attached to the potential free contact of the energy meter.
RJ11connector:Usesignalcable2and4toconnectwiththeenergymeterofthegridoperator.
RJ12connector:Usesignalcable3and5toconnectwiththeenergymeterofthegridoperator.
Image 7: RJ11 and RJ 12 connector
5. Start a charging session and check whether the behaviour of the charging station is as expected.
4. INSTALLATION
Station response Normally Closed (NC) contact Normally Open (NO) contact
Allow charging Suspend when closed Suspend when opened
Suspend charging Suspend when closed Suspend when opened
NOTICE!
Before installing the system read the requirements as described in the paragraph 'Requirements'.
NOTICE!
Selectingtherightsettingshouldbedoneaccordingtothecongurationofthecontactintheenergymeterofthegrid
operator.
Station response Test procedure
Suspend when closed Test procedure A
Step1:Shortcircuitpin2and4(RJ11)orpin3and5(RJ12).
Startachargingsession.Whenthecongurationissetright,thechargingstationwill
respondby(dependingonthetypeofchargingstation):
Showing the message ‘Charging session halted by energy supplier’ on the screen
Blinking the blue led when starting the charging process
Step2:Undotheshortcircuitingandstartachargingsession.Chargingispossible.
Suspend when opened Test procedure B
Step1:Shortcircuitpin2and4(RJ11)orpin3and5(RJ12).Startachargingsession.
Charging is possible.
Step2:Undotheshortcircuitingandstartachargingsession.Whenthecongurationis
setright,thechargingstationwillrespondby(dependingonthetypeofchargingstation):
Showing the message ‘Charging session halted by energy supplier’ on the screen
Blinking the blue led when starting the charging process
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfen Suspend Charging mode - Addendum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfen Suspend Charging mode - Addendum in the language / languages: English as an attachment in your email.

The manual is 5.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info