802064
48
Zoom out
Zoom in
Previous page
1/62
Next page
6.3.3.3 Laadstation voor SCN configureren via ACE
Service Installer
Notice
Het SCN berekent de Socket count op basis van de
configuratie-instellingen van de toegevoegde laadstations.
Het is zeer belangrijk om alle opgegeven instellingen
correct in te stellen.
Notice
Initialiseer het SCN altijd na het wijzigen van SCN-
gerelateerde configuratie-instellingen!
1. Open de ACE Service Installer
2. Selecteer het te configureren laadstation en klik op de
knop Power settings
3. Selecteer de optie Installatie en vul de Station
maximum current (A) in. Dit is de maximale stroom die
het volledige laadstation mag leveren, dit wordt ook
gebruikt voor Standard Load Balancing bij laadstations
met dubbele sockets.
Opmerking: in dit voorbeeld wordt een laadstation met
dubbele socket gebruikt. Wanneer u een laadstation
met enkel socket configureert, zullen sommige van de
configuratie-items niet worden weergegeven omdat ze
niet van toepassing zijn.
4. Selecteer de optie Connector en vul de maximale
stroomsterkte (A) in. Dit is de maximaal toegestane
stroomsterkte die het socket kan leveren op basis
van het type laadstation en de maximaal beschikbare
stroom. Herhaal deze stap voor de tweede connector,
indien van toepassing.
5. Selecteer het tabblad Load balancing en selecteer SCN.
Vul de waarde voor de Safe Current (A) in. Dit is het
beschikbare vermogen dat is gereserveerd voor een
socket wanneer het laadstation de verbinding met het
SCN verliest. Alfen adviseert om een waarde >6A in
te stellen. Opmerking: de veilige stroomsterkte hoeft
niet per individueel laadstation te worden ingesteld
wanneer deze op een LAN is aangesloten tijdens de
configuratie. Vervolgens wordt deSocket Safe Current
(SCN-instelling) toegepast op alle sockets in het SCN
wanneer deze is geïnitialiseerd.
Notice
Als een laadstation wordt toegevoegd aan een SCN die
al in gebruik is (gedurende een langere tijd) zal het SCN
automatisch de instelling van de Socket count aanpassen,
maar alleen als het laadstation wordt toegevoegd aan het
SCN via de knop Add to SCN .
6.3.3.4 Configureer SCN en het laadstation via een
backoffice
Notice
De configuratie van een SCN via een backoffice is zeer
foutgevoelig, maar theoretisch mogelijk. Alfen raadt aan om
het SCN en laadstations te configureren via de ACE Service
Installer.
Notice
Houd er rekening mee dat wanneer een laadstation in
een later stadium aan een bestaand SCN moet worden
toegevoegd, de SCN-SocketCount-instelling op alle
laadstations moet worden bijgewerkt. Herstart elk
laadstation na de update.
6. SMART CHARGING NETWORK
Implementatie handleiding | Smart Charging | Alfen Charging Equipment | Versie 1.0 | NL | April 2021
48
NEDERLANDS
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfen Smart Charging - Implementation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfen Smart Charging - Implementation Guide in the language / languages: Dutch as an attachment in your email.

The manual is 5.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info