631108
64
Zoom out
Zoom in
Previous page
1/80
Next page
Attenzione:
Rimozione del piedino
Collocazione del piedino
Rimozione e attacco del gambo del
piedino di compressione
Attacco della guida per orli / punti
trapuntati
Girare l'interruttore di accensione su ("O")
durante l'esecuzione di queste operazioni!
Sollevare totalmente il piedino mediante
l'apposita levetta.
Sollevare la leva (e) per sganciare il piedino.
(1)
Abbassare il gambo del piedino di
compressione (b) mediante l'apposita levetta
del piedino, fino a quando l'intaglio (c) si
trova in posizione direttamente superiore
all'alberino (d). (2) Il piedino di compressione
(f) si aggancerà automaticamente.
Sollevare totalmente la staffa di pressione (a)
mediante l'apposita levetta del piedino di
compressione. Rimuovere e attaccare il
gambo del piedino di compressione (b)
come illustrato. (3)
Innestare la guida per orli / punti trapuntati
(g) nella fessura, come illustrato. Regolare
secondo necessità per orli, pieghe, punti
trapuntati, ecc. (4)
Atenção:
Retirar o Pedal
Fixar o pé calcador
Remover e montar a haste do
calcador
Montar o guia de orlas/acolchoamento
Desligue a máquina ("O") sempre que
fizer estas operações!
Levante o calcador com o elevador do
pé calcador.
Levante o elevador (e) e o pé solta-se. (1)
Baixe a haste do calcador (b) com o
elevador do pé calcador, até que o corte (c)
esteja directamente sobre o pino (d). (2)
O pé calcador (f) encaixa automaticamente.
Levante barra do calcador (a) com o
elevador do pé calcador.
Remover e montar a haste do calcador
(b) como mostrado na figura. (3)
Monte o guia de orlas/acolchoamento (g)
na ranhura, como se mostra. Ajuste as
bainhas, pregas, acolchoamento, etc. (4)
Attention:
Removing the presser foot
Attaching the presser foot
Removing and Attaching the presser
foot shank
Attaching the edge/ quilting guide
Turn power switch to off ("O") when
carrying out any of the above
operations!
Raise the presser foot using the presser
foot lifter.
Raise the lever (e) and the foot
disengages. (1)
Lower the presser foot shank (b) using the
presser foot lifter, until the cut-out (c) is
directly above the pin (d). (2) The presser
foot (f) will engage automatically.
Raise the presser bar (a) with the presser
foot lifter.
Removing and Attaching the presser foot
shank (b) as illustrated. (3)
Attach the edge/quilting guide (g) in the
slot as illustrated. Adjust as needed for
hems, pleats, quilting, etc. (4)
Changing the presser foot
PT
EN
IT
Mudar o Pedal
Sostituzione del piedino
64
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa Style up 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa Style up 40 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alfa Style up 40

Alfa Style up 40 User Manual - German, Dutch, French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info