631107
74
Zoom out
Zoom in
Previous page
1/80
Next page
Attenzione:
Rimozione della piastra dell'ago:
Pulizia delle griffe:
Pulizia e lubrificazione del gancio:
Importante:
Scollegare la macchina dall'alimentazione
elettrica staccando la spina dalla presa.
Durante le operazioni di pulizia della
macchina, scollegarla sempre
dall'alimentazione elettrica.
Girare il volantino fino a quando l'ago è
totalmente sollevato. Aprire il coperchio
frontale ribaltabile e svitare le viti della
piastra dell'ago utilizzando il cacciavite. (1)
Estrarre la capsula della bobina e utilizzare il
pennellino in dotazione per pulire tutta la
zona. (2)
Estrarre la capsula della bobina. Far scattare
verso l'esterno il braccio di blocco del gancio
(a). Togliere il coperchio della pista del
gancio (b) e quindi il gancio (c); pulire con un
panno morbido. Lubrificare sul punto (d) (1-2
gocce di olio) con l'olio per macchine da
cucire. Girare il volantino fino a quando la
pista del gancio (e) si trova sulla posizione
sinistra. Sostituzione del gancio (c) Sostituire
il coperchio della pista del gancio e far
scattare indietro i due bracci di blocco del
gancio. Inserire la capsula della bobina e la
bobina, quindi sostituire la piastra del punto.
La lanugine e i resti di filo del tessuto vanno
rimossi regolarmente. La macchina da cucire
dovrebbe essere sottoposta a revisione a
intervalli regolari da parte di uno dei nostri
tecnici di assistenza.
Atenção:
Retire a Placa de agulha:
Limpeza do alimentador:
Limpeza e lubrificação do gancho:
Importante:
Desligue a máquina da corrente eléctrica,
tirando a ficha da tomada eléctrica.
Sempre que limpar a máquina, desligue
sempre da corrente eléctrica.
Rode o volante até a agulha estar toda para
cima. Abra a tampa articulada e
desaparafuse os parafusos da placa de
agulha com uma chave de parafusos. (1)
Retire o porta bobine e com a escova
fornecida limpe toda essa zona. (2)
Retire o porta bobina. Puxe os dois braços
de retenção (a) para fora. Retire a tampa
da lançadeira do gancho (b) e o gancho c)
e limpe com um pano macio. Lubrifique no
ponto (1-2 gotas) com óleo da máquina de
costura. Rode o volante até a lançadeira do
gancho (e) estar do lado esquerdo.
Substitua o gancho (c). Substitua a tampa
da lançadeira do gancho e encaixe
novamente nos dois braços de retenção.
Meta o porta bobine e a bobine e substitua
a placa de pontos.
Deve tirar ocasionalmente restos de linhas
e cotão do algodão. Deve fazer assistência
regularmente num dos nossos agentes
aqui indicados.
PT
EN
IT
Maintenance
Attention:
Remove the needle plate:
Cleaning the feed dog:
Cleaning and lubricating the hook:
Important:
Disconnect the machine from the
electricity supply by removing the plug
from the mains socket. When cleaning
the machine, it must always be
disconnected from the electricity supply.
Turn the handwheel until the needle is fully
raised. Open the hinged front cover and
unscrew the needle plate screws with the
screw driver. (1)
Remove the bobbin case and use the brush
supplied to clean the whole area. (2)
Remove the bobbin case. Snap the two
hook retaining arms (a) outwards. Remove
the hook race cover (b) and the hook (c)
and clean with a soft cloth. Lubricate at the
point (d) (1-2 drops) with sewing machine
oil. Turn the handwheel until the hook race
(e) is in the left position. Replace the hook
(c). Replace the hook race cover and snap
back the two hook retaining arms. Insert the
bobbin case and bobbin and replace the
stitch plate.
Fabric fluff and threads must be removed
regularly. Your machine should be serviced
at regular intervals at one of our service
agencies.
1
Manutenção Manutenzione
74
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa Style up 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa Style up 30 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alfa Style up 30

Alfa Style up 30 User Manual - German, Dutch, French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info