631106
32
Zoom out
Zoom in
Previous page
1/80
Next page
Tensione filo superiore (1)
Tensione filo inferiore (2)
Avvertenza:
Regolazione tensione filo superiore di
base: "4".
Per incrementare la tensione, girare il
quadrante verso il successivo numero
superiore. Per ridurre la tensione, girare il
quadrante verso il successivo numero
inferiore.
A. Tensione normale del filo
B. Tensione insufficiente, filo allentato
C. Tensione eccessiva, filo troppo tirato
La tensione della bobina viene regolata
in fase di fabbricazione della macchina,
pertanto non è necessario procedere
ad alcuna regolazione.
Per verificare la tensione della bobina,
collocare la bobina totalmente carica nella
capsula. Far pendere la capsula e la pinza
trattenendo il filo.
Se la tensione è corretta, scuotendo
delicatamente, il filo si srotolerà di circa 5-
10 cm e la bobina resterà sospesa.
Se la bobina piena continua a srotolarsi,
ciò significa che la tensione è troppo lasca.
Se la tensione è eccessiva, tende a
srotolarsi difficilmente, o non si srotola per
niente. Per regolare la tensione servirsi
del cacciavite.
Tensão da linha superior (1)
Tensão da linha inferior (1)
Nota:
Configuração básica da tensão da linha
superior: "4".
Para aumentar a tensão, rode o botão
para o número seguinte. Para diminuir a
tensão, rode o botão para o número
abaixo.
A. Tensão normal da linha
B. Tensão da linha superior muito solta
C. Tensão da linha superior muito
apertada
A tensão da bobina é regulada
correctamente o durante fabrico, por
isso o utilizador final não deve fazer
alterações.
Para testar a tensão da linha na bobina,
coloca-se a bobina cheia no porta bobina.
O porta bobina e a pinça ficam suspensas
pelo fim da linha.
Se a tensão estiver correcta, a linha
desbobina entre5a10cm,quando
estiver ligeiramente a oscilar e depois fica
suspensa.
Se toda a bobina desbobinar, a tensão
fica muito frouxa. Se a tensão estiver
muito apertada, dificilmente desbobina ou
nem sequer desbobina. Para ajustar, use
uma chave de parafusos.
Upper thread tension (1)
Lower thread tension (2)
Note:
Basic upper thread tension setting: "4".
To increase the tension, turn the dial to
the next higher number. To reduce the
tension, turn the dial to the next lower
number.
A. Normal thread tension
B. Upper thread tension too loose
C. Upper thread tension too tight
The bobbin tension is adjusted correctly
during manufacturing, therefore no
changes are necessary.
To test the bobbin thread tension, the full
bobbin is placed in the bobbin case. The
bobbin case and gripper are then
suspended by the end of the thread.
If the tension is correct, the thread will
unwind by about 5 to 10cm, when gently
swung and will then remain suspended.
If the full bobbin case unwinds, the tension
is too slack. If the tension is too tight, it
hardly unwinds or does not unwind at all.
To adjust, use the screwdriver.
Thread tension
PT
EN
IT
Esticar a linha Regolazione tensione filo
32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa Style up 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa Style up 20 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alfa Style up 20

Alfa Style up 20 User Manual - German, Dutch, French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info