631104
18
Zoom out
Zoom in
Previous page
1/156
Next page
Enhanced Accident Response System Reset Procedure
After the event occurs, when the system is active, a message regarding fuel cutoff is displayed. Turn
the ignition switch from ignition AVV or MAR to ignition STOP. Carefully check the vehicle for fuel
leaks in the engine compar tment and on the ground near the engine compartment and fuel tank
before resetting the system and starting the engine.
Depending on the nature of the event the left and right turn signal lights, located in the instr ument
panel, may both be blinking and will continue to blink. In order to move your vehicle to the side of
the road, you must follow the system reset procedure.
Customer Action Customer Will See
1. Turn Ignition STOP. (Turn Signal Switch Must
Be Placed In Neutral State).
2. Turn Ignition MAR. Left Tur n Light Is OFF. Right Turn Light BLINKS.
3. Turn Right Turn Signal Switch ON.
Right Tur n Light Is ON SOLID. Left Turn Light
BLINKS.
4. Turn Left Turn Signal Switch ON.
Left Tur n Light Is ON SOLID. Right Turn Signal
Light BLINKS.
5. Turn Right Turn Signal Switch ON.
Right Tur n Light Is ON SOLID. Left Turn Light
BLINKS.
6. Turn Left Turn Signal Switch ON.
Left Tur n Light Is ON SOLID. Right Turn Light Is
ON SOLID.
7. Turn Left Turn Signal Switch OFF. (Turn Signal
Switch Must Be Placed In Neutral State).
Left Tur n light Is OFF. Right Turn Light is OFF.
8. Turn Ignition STOP.
9. Turn Hazard Flashers OFF (Manually).
System is now reset and the engine may be
started.
If a reset procedure step is not completed within 60 seconds, then the tur n signal lights will blink
and the reset procedure must be perfor med again in order to be successful.
Air Bag War ning Light
The air bags must be ready to inflate for your protection in a collision. The Occupant Restraint
Controller (ORC) monitors the internal circuits and interconnecting wiring associated with air bag
system electrical components.
The ORC monitors the readiness of the electronic parts of the air bag system whenever the ignition
switch is in the AVV or MAR position. If the ignition switch is in the STOP position the air bag system
is not on and the air bags will not inflate.
The ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight
seconds for a self-check when the ignition switch is first tur ned to the MAR position. After the
self-check, the Air Bag Warning Light will turn off. If the ORC detects a malfunction in any part of the
system, it turns on the Air Bag Warning Light, either momentarily or continuously.A single chime will
sound to alert you if the light comes on again after initial startup.
GETTING STARTED
16
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa Romeo 4C Coupe - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa Romeo 4C Coupe - 2016 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info