631110
14
Zoom out
Zoom in
Previous page
1/124
Next page
To disable the volumetric protection, turn the ignition key from STOP to MAR-ON twice in a row, then
activate the alarm within 15 seconds, pushing the lock button on the remote control. When the
function is deactivated, this is indicated by the vehicle security light in the instrument panel
flashing for several seconds.
To disable the anti-lift protection, the ignition key must be turned from STOP to MAR-ON three times
in a row, followed by activating the alarm within 15 seconds, pushing the lock button on the remote
control.
When the function is deactivated, this is indicated by the vehicle security light in the instrument
panel flashing for several seconds.
Any disabling of the volumetric/anti-lift protection must be repeated each time the instrument
panel is switched off.
SEAT BELT SYSTEMS
Be sure ever yone in your vehicle is in a seat and using a seat belt properly.
Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To
remove slack in the lap belt por tion, pull up on the shoulder belt.To loosen the lap belt if it is too
tight, tilt the latch plate and pull on the lap belt.A snug seat belt reduces the risk of sliding under
the seat belt in a collision.
Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is
comfortable and not resting on your neck. The retractor will withdraw any slack in the shoulder
belt.
A deployed pretensioner or a deployed air bag must be replaced immediately.
Lap/Shoulder Belts
All seating positions in your vehicle are equipped with lap/shoulder belts.
Be sure ever yone in your vehicle is in a seat and using a seat belt properly.
Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To
remove slack in the lap belt por tion, pull up on the shoulder belt.To loosen the lap belt if it is too
tight, tilt the latch plate and pull on the lap belt.A snug seat belt reduces the risk of sliding under
the seat belt in a collision.
Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is
comfortable and not resting on your neck. The retractor will withdraw any slack in the shoulder
belt.
Seat Belt Pretensioner
The front seat belt system is equipped with pretensioning devices that are designed to remove
slack from the seat belt in the event of a collision.
A deployed pretensioner or a deployed air bag must be replaced immediately.
GETTING STARTED
12
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa Romeo 4C - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa Romeo 4C - 2015 in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info