631096
7
Zoom out
Zoom in
Previous page
1/35
Next page
5
Presser Foot Lifter
The presser foot lifter raises and lowers the
presser foot.
You can raise it about 1/4˝ (0.6 cm) higher
than the normal up position to help place
heavy fabric under the foot.
q Presser foot lifter
w Normal up position
e Highest position
Setting Spool Pins
The spool pins are used for holding the
spools of thread when feeding the thread to
the machine.
To use, pull up the spool pins. Push down for
storage.
q Upper thread
w Hole
e Ta ngle
Changing Presser Foot
q Presser foot
w Groove
e Pin
q
e
q
w
e
ew
w
•To remove
Turn the handwheel toward you to raise the
needle bar to its highest position.
Raise the presser foot.
Push the toe of the presser foot q to snap
it off the foot holder.
•To attach
Place the presser foot so that the pin e on
the foot lines up directly below the
groove w of the foot holder.
Lower the foot holder to lock the foot in
place.
CAUTION:
When attaching or removing presser foot,
turn OFF the power switch.
q
w
q
e
NOTE:
When using thread which has tendency to
tangle around a spool pin e, thread
through the hole w of spool pin as shown.
The hole should face the thread spool.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa Next 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa Next 40 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alfa Next 40

Alfa Next 40 User Manual - German - 72 pages

Alfa Next 40 User Manual - Dutch - 34 pages

Alfa Next 40 User Manual - French, Italian, Portuguese, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info