631094
21
Zoom out
Zoom in
Previous page
1/29
Next page
19
Free Hand Mending and Embroidery
q Stitch pattern: 1 to 7
w Presser foot: None
e Thread tension: 2 to 6
r Darning plate
qwe
r
Mending
Place the darning plate. Remove the foot
holder and presser foot. Center the hole in
the fabric on an embroidery hoop, as
shown.
Lower the presser bar and sew at a slow
speed.
Move the fabric back and forth slowly until
the darning area is covered. Turn the fabric
a 1/4 turn (90°), and sew another layer of
stitching over the first layer.
NOTE:
If fabric is thin or badly damaged, attach a
separate piece of fabric under the hole to
reinforce it.
Embroidery
Put on the darning plate.
Remove the foot holder and foot.
Adjust the stitch width.
Mark the drawing on the fabric with tailor’s
chalk.
Set fabric in the embroidery hoop and put it
under the needle.
Lower the presser bar to engage upper
thread tension. Holding upper thread with
right hand, turn the handwheel toward you.
Pull upper thread to let bobbin thread out of
fabric.
At medium speed, stitch along the marked
line.
After mending or embroidery sewing,
remove the darning plate and put back the
foot holder and foot.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa Next 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa Next 20 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alfa Next 20

Alfa Next 20 User Manual - German - 64 pages

Alfa Next 20 User Manual - Dutch - 28 pages

Alfa Next 20 User Manual - French, Italian, Portuguese, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info