631105
40
Zoom out
Zoom in
Previous page
1/54
Next page
34
q
w
e
r
Mending and Embroidery
q Stitch pattern: 1 to 6
w Presser foot: Removed
e Thread tension: 2 to 6
r Darning plate
Mending
Place the darning plate. Remove the foot holder and
presser foot. Center the hole in the fabric on an
embroidery hoop, as shown.
Lower the presser bar and sew at a slow speed.
Move the fabric back and forth slowly until the darning
area is covered.
Turn the fabric a 1/4 turn (90 degrees), and sew
another layer of stitching over the first layer.
NOTE:
If fabric is thin or badly damaged, attach a separate
piece of fabric under the hole to reinforce it.
Embroidery
Put on the darning plate.
Remove the foot holder and foot.
Adjust the stitch width.
Mark the drawing on the fabric with tailor’s chalk.
Set fabric in the embroidery hoop and put it under the
needle.
Lower the presser bar to engage upper thread
tension. Holding upper thread with right hand, turn the
handwheel toward you.
Pull upper thread to let bobbin thread out of fabric.
At medium speed, stitch along the marked line.
After mending or embroidery sewing, remove the
darning plate and put back the foot holder and foot.
123
4
5
3
4
56
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alfa COMPAKT 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alfa COMPAKT 100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alfa COMPAKT 100

Alfa COMPAKT 100 User Manual - German, Italian, Portuguese - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info