654670
4
Zoom out
Zoom in
Previous page
1/10
Next page
4
Golden Mask 4
1. Standard coil
Golden Mask 4 features a standard 10.5”
(27 cm) DD search coil. The coil is made
from ABS plastic and its lower end is
covered with epoxide resin which adds
strength and hermetic seal to the whole
construction. The search coil has good
sensitivity to both small and large objects.
Optional coils
DD 7 (18 cm), DD 8” (20 cm), DD 8x10”
(20x25 cm), DD 10X12” (25x31 cm)
DD 12.5” (32 cm), 12.5x15” (32x38 cm);
The smaller coils have better sensitivity to
small objects (coins) and are preferably
used on heavily polluted terrains. The larger
coils (DD 32 and DD 32x38) have better
sensitivity to larger objects and are suitable
for deep underground search, having 10-20
% better sensitivity than DD 27 cm.
2. Shaft
The shaft is made of aluminum tube and
features a carbon lower rod (not metal) to
avoid interference with the coil
performance.
3. Control box with electronics
The control box is made of extremely robust
ABS plastic.
4. Armrest
The armrest is made of aluminum for
greater strength and its diameter is
adjustable for a better grip. The foam hand
grip is attached at the front end of the
armrest.
5. Battery holder
The battery holder is made of plastic and
contains a pack of 10 batteries AA NiMH
1,2 V/ 1000 mAh.
4. Assembly/ Disassembly
Take the lower rod (the carbon part), place
the rubber sealing in the openings of the
stem and align them with the openings of
the mounting ears on the search coil. Insert
the plastic bolt into the openings and press
it until it comes out of the opposite end,
then screw the plastic nut and tighten it
gently.
Warning:
It is essential to replace the rubber sealing
when it wears off to avoid over-tightening of the
screw nut which may cause deformation of the
mounting ears of the search coil and overall
distortion of the coil. Deformation of the search
coil leads to severe deterioration of the metal
detector parameters!
Take the middle rod, unscrew plastic nut
No.6 and mount the lower (carbon) rod.
This telescopic connection allows adjusting
the total length of the shaft according to
your height. Make sure that the distance
between the aluminum part and the search
coil is at least 30 cm. To fix the length,
tighten the plastic nut.
Take the electronics component, unscrew
the big plastic screw nut No. 7 and mount
the shaft with the search coil. Then screw
the nut back on until the movement of the
coil against the shaft is restricted. Wind the
cable tightly upwards around the shaft and
make sure to leave the cable loose at the
lower end near the search coil to avoid
damage to the cable while the
metaldetector is folded for transportation.
Downloaded from www.Manualslib.com manuals search engine
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alex359 Golden Mask 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alex359 Golden Mask 4 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info