693690

Alesis Vortex Wireless 2 Editor Manual

12
Zoom out
Zoom in
Previous page
1/15
Next page
12
Program Change / Keybed
Click the Program Change/Keybed tab to set Program Change parameters for when presets are loaded and the
MIDI assignments for Vortex Wireless 2's keys.
Program Change
Send On Load: Click this menu and select one of the following options.
• Yes: Vortex Wireless 2 will send a combined program number, Bank MSB, and Bank LSB number when a Preset
is loaded. This can be useful for selecting a preset from a specific bank of a virtual instrument or synthesizer (the
instrument or synthesizer must support these messages).
• No: No messages are sent when a Preset is loaded.
Program #: The Program Change number sent when a preset is loaded. Click it and enter a number (0–127).
Program LSB: The Bank LSB (Least Significant Byte) number sent when a preset is loaded. Click it and enter a
number (0–127).
Program MSB: The Bank MSB (Most Significant Byte) number sent when a preset is loaded. Click it and enter a
number (0–127).
Split Point
Curve: The keybed will use this velocity curve number to determine what velocity to use depending on how hard you
press it. Click this menu and select Curve 1 – Curve 8. See Appendix > Velocity Curves for an illustration of the
curves.
Split Mode: Click this menu and select one of the following options.
• On: The keybed will be split into two sections at the Split Key: the lower register (Lower Zone) and upper
register (Upper Zone). For each section, you can set its MIDI channel, transposition, and MIDI to DIN status. See
the next section for more details.
• Off: The keybed will use only one MIDI channel, transposition, and MIDI to DIN status, which you can set.
Split Key: This number indicates how many keys (starting from the lowest-register key) are in the Lower Zone
section. Any keys above this section belong to the Upper Zone. Click it and enter a number (1–36).
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis Vortex Wireless 2 Editor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis Vortex Wireless 2 Editor in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info