693690
6
Zoom out
Zoom in
Previous page
1/15
Next page
6
Editing the Controls
Pads
Click the Pads tab to set the MIDI assignments and Colors for Vortex Wireless 2's Pads. Click MIDI or Colors below
the Pad number to toggle between the editing options. Click the left or right arrows on the sides of the window to
toggle between viewing Pad 14 and Pad 58.
MIDI
Type: Click this menu and select one of the following options. The parameters below will depend on your selection.
Note: The pad will send a MIDI Note On message when you press it and hold it and a MIDI Note Off message
when you release it.
CC Toggle: The pad will send a CC message with one value when you press it to turn it on and another value
when you press it to turn it off. The values will alternate with each press.
CC Momentary: The pad will send a CC message with one value when you press and hold it and another value
when you release it.
Program Change: The pad will send Program Change messages.
Panic: The pad will send a MIDI Panic (all notes off) message.
MIDI Channel: The pad will send its MIDI messages over this channel. Click this menu and select Channel 1
Channel 16.
Note (when Type is set to Note): The pad will send this MIDI note number when you press it. Click it and enter a
number (0127).
Velocity (when Type is set to Note): When this is set to a number from 1 to 127, the pad will send its MIDI Note On
message with this velocity regardless of how hard you press it. When this is set to 0, the pad will send its MIDI Note
On message with a velocity based on how hard you hit it and the Curve setting. Click it and enter a number (0127).
Curve (when Type is set to Note): The pad will use this velocity curve number to determine what velocity to use
depending on how hard you press it. Click this menu and select Curve 1 Curve 8. See
Appendix > Velocity
Curves for an illustration of the curves.
CC (when Type is set to CC Toggle or CC Momentary): The pad will send its MIDI messages using this CC number.
Click it and enter a number (0127).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis Vortex Wireless 2 Editor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis Vortex Wireless 2 Editor in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info