445224
51
Zoom out
Zoom in
Previous page
1/71
Next page
47
6.8 PAGE 8: SELECT DRUM SETS VIA MIDI PROGRAM CHANGES (PRG CHNG)
PAGE
SETUP
MIDI
PRG CHNG
OFF
PERFORM
The display shows PRG CHNG. Program Change commands can change Drum Sets
numbers at any time, including while the SR-16 is playing. To have the SR-16 receive
Program Changes, use the INC/DEC buttons to select ON. Select OFF to have the SR-16
ignore Program Changes.
Background Program Change (PC) 00 selects User Drum Set 00; PC 01 selects User Drum Set 01; PC 02
selects User Drum Set 02; etc. Caution! Some units number Program Changes as 1-128, others as 0-127, and
some as banks of programs. If the device generating Program Changes follows a non-standard protocol, it's a good
idea to make up a conversion chart that shows which Program Changes call up which Drum Sets.
Program Changes 00-49 select the 50 User Drum Sets. Program Changes 50-99 select Preset Drum Sets 00-49.
Program Changes 100-127 select User Drum Sets 00-27.
The current Pattern will remember whatever Drum Set is selected via Program Changes, just as if you had selected
it manually, unless the SR-16 is in Manual mode (described in Page 9 of the Drum Set menu).
If Program Change is enabled, and the SR-16 is in MULTI-DRUMSET mode (see section 6.9 below), and a
program change is received in the 00-49 range, the SR-16 will automatically select the drumset group
corresponding to the program change number. For example, if program 36 is received with the above conditions
met, the note map will change to drumset group 30-39.
6.9 PAGE 9: MAP DRUM NOTES (NOTE MAP)
Within each Pattern, MIDI notes can either be mapped to 12 different sounds in NORMAL
mode,.or they can be mapped to any of five drumset groups (User Drumsets 00-09, 10-19,
20-29, 30-39, and 40-49) in MULTI-DRUMSET mode. Any of these drumset groups can
cover MIDI notes 000 through 119. This makes the SR-16 ideal for use as a drum sound
module, triggered by either an electronic drum kit or set of electronic drum pads, or by notes
from a sequencer.
Note that while in this mode, you cannot record notes into a Pattern via MIDI. It is assumed
that you will be using the SR-16 strictly as a drum sound expander module.
The chart on the following page shows which drum pads of which drum sets are triggered by
which MIDI notes. The logic to this assignment is that there are 12 drum pads per octave of
notes, so pad 1 always starts on a C note (MIDI notes 000, 012, 024, 036, 048, 060, 072, 084,
096, and 108). Remember that these drum assignments must be saved as Drum Sets in order
to retain the note map assignments.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis SR-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis SR-16 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alesis SR-16

Alesis SR-16 User Manual - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info