693699
10
Zoom out
Zoom in
Previous page
1/50
Next page
10
GENERAL TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
No sound from target device.
Q88 is not properly
connected.
Check your computer's USB connection to confirm that
the Q88 is recognized. If necessary, replug the
connection and restart your computer.
If controlling an external hardware module, make sure
that the MIDI cable is connected to Q88 and to the
device's MIDI IN port.
Q88 was connected after the
software application started.
Restart the software application.
Problem is caused by use of
a USB hub.
Unplug Q88 from the USB hub and connect directly to
the computer.
Software is not set to receive
MIDI data from the Q88.
Ensure that Q88 or USB MIDI device is listed as an
active MIDI source in your application. Usually, the
MIDI settings can be accessed through the
application's Preferences menu.
Q88's MIDI channel is not the
same as software's incoming
MIDI channel.
Make sure that the Q88 is sending MIDI information on
the channel over which the target device is set to
receive it.
Notes sustain continuously.
Sustain pedal was plugged in
after the Q88 was powered
on.
Power off Q88 for 10 seconds and then restart.
Stuck notes due to
incomplete MIDI data.
Turn Q88’s power off, wait 10 seconds, and then turn it
on again.
Sustain pedal works in
reverse.
Sustain pedal was plugged in
after power was turned on.
With the pedal plugged in, turn the Q88's power off,
wait a moment, and turn it on again.
When I press a key, there is
a delay before I hear any
sound.
This is software latency.
Try to increase the buffer size for your software
program, use low-latency ASIO drivers, or temporarily
use a General MIDI instrument in place of a high-
latency VST instrument while recording.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis Q88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis Q88 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info