693707
54
Zoom out
Zoom in
Previous page
1/62
Next page
Specifications
Multimix 12R Reference Manual 45
SPECIFICATIONS
All measurements taken with an Audio Precision System One. All noise
measurements taken with trim at minimum and faders at unity gain with 22
Hz to 22 kHz bandwidth unless otherwise specified. All In & Out
measurements made on balanced +4 dBu connectors. (+4 dBu into a line
input with faders at unity and the meter reading “0” will yield +4 dBu into a
balanced load or -2 dBu into an unbalanced load.)
Frequency Response
10 Hz – 65 kHz +0/-1 dB (any input to any output at
nominal operating levels)
-3dB Point: 125 kHz
Connectors
MIC IN jacks: Female XLR
(Pin 1 ground, Pin 2 +, Pin 3 -)
LINE IN jacks: Female 1/4" 3-conductor phone
(Tip = +, ring = -, sleeve =
ground)
INSERT jacks: Female 1/4" 3-conductor phone
(Tip = send, ring = return, sleeve
= ground)
Inserting plug to first "click"
allows direct output without
breaking normal signal flow
STEREO LINE IN and
STEREO AUX RETURN jacks: Female 1/4" 3-conductor x 2
MAIN OUT BALANCED,
MONITOR OUT, and
AUX SEND jacks: Female 1/4" 3-conductor phone
(Tip = +, ring = -, sleeve =
ground)
MAIN OUT -10 dBV jacks: Female phono ("RCA") jacks
TAPE IN jacks: Female phono ("RCA") jacks
Specifications
Levels
MIC IN -60 dBu to -10 dBu nominal,
maximum level +12 dBu
LINE IN -40 dBu to +10 dBu nominal,
maximum level +32 dBu
(balanced)
STEREO LINE IN -15 dBu to +15 dBu nominal,
maximum input level +22 dBu
MAXIMUM GAIN +76 dB, MIC IN to MAIN OUT,
balanced
+80 dB, MIC IN to MONITOR
OUT, balanced or unbalanced
CHANNEL PEAK LED ON: 6 dB below channel clipping
METER: Peak type
-24 dB to PK (+18 dB over
reference at MAIN OUT, 6 dB
before output clipping)
MAIN OUT LEVEL (1/4" phone jacks) (when meter is at 0 VU)
+4 dBu (1.24 volts)
into a balanced load
-2 dBu into an unbalanced load
MAIN OUT LEVEL (phono jacks) -10 dBV (.316 volts) unbalanced
MAXIMUM OUTPUT LEVEL +22 dBu unbalanced, +28 dBu
balanced (6 dB above "PK"
segment of main meter)
MONITOR OUT LEVEL Same as above, but variable
following MONITOR/PHONES
control
INSERT/DIRECT OUT (tip) Unity gain
INSERT IN (ring) Maximum level +22 dBu
HEADROOM: 23.5 dB above nominal output
Impedance
MIC IN 50-150 nominal source
impedance (presents 4 k
balanced load impedance)
LINE IN 600 -2 k nominal
(>20 k load impedance)
OUTPUTS (MAIN, AUX and
MON): 150 unbalanced,
300 balanced
1.1 k
at -10dBV MAIN OUTS
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis MultiMix 12R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis MultiMix 12R in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info