693656
14
Zoom out
Zoom in
Previous page
1/70
Next page
1
Hardware Overview
12
Rear Panel
You’ll find the following on the rear of your IO|14/26:
1. Headphone Outputs – Connect your headphones to these
outputs. The first headphone output always mirrors the
analog 1/2 output pair. The second headphone output is
assignable in software.
2. Main outputs (8 outputs on IO|26; 2 outputs on IO|14)
– Use ¼,” “TRS” cables to connect these outputs to the
balanced inputs of your powered speakers or power amplifier.
If your speakers or amplifier only provide unbalanced inputs,
use unbalanced (“TS”) cables.
The IO|26 (shown above) has 8 outputs. The IO|14 has 2
outputs.
If you are using the IO|26 and wish to connect additional
speakers, headphone amplifiers or hardware processors,
connect them to outputs 3 through 8.
3. Phono input (IO|26 only) – Connect your turntable to this
input.
If your turntable has a grounding cable, attach it to the
grounding screw to the upper right of the phono inputs.
This grounding will minimize humming and buzzing.
4. ADAT Lightpipe Inputs – These optical digital inputs
can accommodate a wide variety of ADAT-enabled gear.
The IO|14 has one ADAT input whereas the IO|26
(shown above) has two ADAT inputs.
Use ADAT-compatible optical cables to connect to these
inputs.
5. S/PDIF Connectors – Connect S/PDIF-enabled digital
devices (such as the Alesis Masterlink, CD players, DAT
machines, MiniDisc Recorders, etc.) to your IO|14/26 using
coaxial, RCA-terminated cables.
6. MIDI Connectors – Connect your keyboards, sound
modules, or other MIDI devices to your IO|14/26 using 5-
pin MIDI cables. Remember to chain the OUTs of each
device to the INs of other devices.
The IO14/26’s outputs are
“impedance balanced.” This
wiring method provides all of
the benefits of “fully
balanced” wiring when the
outputs are connected to
balanced gear. Furthermore,
impedance balancing, unlike
other balancing methods,
allows for trouble-free
connection to unbalanced
devices.
If you connect an ADAT or
S/PDIF input device (or
both), you will need to select
one of them as the “clock
master” in the IO’s control
panel.
The device you select as the
clock master will determine
the IO’s clock rate and will
be responsible for keeping all
of the digital signals
synchronized. Therefore, if
you turn this device off, you
will need to select another
clok master in the control
panel.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis IO26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis IO26 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alesis IO26

Alesis IO26 Quick start guide - English, German, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info