Manual Alesis IO14 (page 44 of 70) (English)

693657

Zoom out

Zoom in

1/70

Getting In Deeper: Hardware

Using the Insert Jacks

Sometimes, you may want to add additional gear into your signal

path before your analog-to-digital converter digitizes your signal

and sends it to the computer. For example, many bass players

like to compress their instrument with an analog compressor

before recording into the computer. Inserts help you do this by

letting you tap into your signal after the IO|14/26’s preamplifier

but before the A/D converter. The two diagrams below

demonstrate where the inserts fit into your signal path.

In the diagram to the left, no insert is used and your signal passes

straight from the preamp to the A/D converter. In the diagram

on the right, an effects processor is inserted into the signal path

just after the preamp (before the A/D converter).

Note that you need a special “insert cable” to utilize this

connection. These cables have a ¼” TRS connector on one end

and two ¼” TS connectors on the other end. The TRS side goes

into the “insert” jack on the IO|14/26. The two TS connectors

are usually labeled “send” and “return.” The “send” plug goes to

your external device’s input whereas the “return” plug connects to

the device’s output.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alesis IO14 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alesis IO14

Alesis IO14 Quick start guide - English, German, French, Italian - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alesis IO14 Manual

Product: