693657

Alesis IO14 Manual

35
Zoom out
Zoom in
Previous page
1/70
Next page
Using the Control Panel
5
33
configuration and the types of audio projects you do, you may find
that one setting clearly outperforms the others.
5. Specify how sample rates can change
Since Windows (and various Windows applications) have a nasty
tendency to try and take control over your audio sample rate—
often without notice—this section allows you to ignore those
sample change events.
- If you do not mind your sample rate changing freely, choose
“Allow SR Changes.”
- To allow only ASIO applications (like Cubase) to change the
sample rate, select “Allow ASIO changes only.”
- You can lock the sample rate—such that it can only be
changed using this control panel—by selecting “Apps cannot
change SR.” This is the safest of all these options.
Whichever setting you choose, the sample rate can always be
changed from within this control panel. Note, however, that if
you have an audio application open, you can cause conflicts with it
if you try to set the sample rate differently here compared to the
setting in the open audio application.
6. Enable or Disable WDM audio
(Windows only)
If you are using ASIO applications exclusively and do not need
access to Windows system sounds, Windows Media Player or other
media players, consider unchecking this box. Doing so helps
ensure that unwanted audio from other applications does not
intrude on your intended audio output.
7. Set the clock master
If you are using multiple Firewire audio devices at once, chain one
to the next, and designate the one at the beginning of the chain as
the clock master.
8 Specify the audio clock source
In digital recording systems, all digital input devices must be
synchronized to the same clock. For IO|14/26, this means that
you need to take care to set the clock source properly when you
use either the S/PDIF or the ADAT inputs.
1. INTERNAL. Use this setting if:
a. You are not connecting any external S/PDIF or
ADAT input devices;
b. You are connecting external S/PDIF or ADAT
input devices, but you are running a cable from the
IO|14/26’s S/PDIF output into one of these
devices. This is a rare case.
I
f you’re using the IO|14/26
by itself, you don’t need to
worry about clocking. Just
make sure that the “Clock
Source” parameter in the
IO|14/26’s control panel is
set to “Internal.”
If you’re connecting your
IO|14/26 to other equipment
through the ADAT or S/PDIF
connections, keep in mind the
following rule of digital
audio:
When connecting devices
digitally, all of your devices
must be locked to ONE clock.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis IO14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis IO14 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alesis IO14

Alesis IO14 Quick start guide - English, German, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info