794955

Alecto WS5400 Manual

37
Zoom out
Zoom in
Previous page
1/90
Next page
37
Step Mode Setting procedure
10 Temperature unit Press [ WIND / + ] or [ NDX / - ] key to change the rain display unit between
˚C or ˚F
11 Wind speed unit Press [ WIND / + ] or [ NDX / - ] key to change the unit in sequence: m/s
km/h knots mph
12 Baro unit Press [ WIND / + ] or [ NDX / - ] key to change the unit in sequence: hPa
inHg mmHg
13 Rain unit Press [ WIND / + ] or [ NDX / - ] key to change the rain display unit between
mm or in
14 Light intensity unit Press [ WIND / + ] or [ NDX / - ] key to change the Light intensity unit in
sequence: Klux Kfc W/m².
15 Channel auto loop Press [ WIND / + ] or [ NDX / - ] key to enable or disable channel auto loop
function
16 7-in-1 sensor point to Press [ WIND / + ] or [ NDX / - ] key to select the sensor located hemisphere
(e.g. US and EU countries are also "N", Australia is "S")
Console will exit setting mode automatically, if no operation after 60 seconds.
SETTING ALARM TIME
1. In normal time mode, press and hold [ ALARM ] key for 2 seconds until the alarm hour digit flashes to enter alarm time
setting mode.
2. Press [ WIND / + ] or [ NDX / - ] key to change the value. Press and hold the key for quick-adjust.
3. Press [ ALARM ] key again to step the setting value to Minute with the Minute digit flashing.
4. Press [ WIND / + ] or [ NDX / - ] key to adjust the value of the flashing digit.
5. Press [ ALARM ] key to save and exit the setting.
6. When enabled the icon will be visible on the LCD.
ACTIVATING THE ALARM FUNCTION
1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds.
2. When the alarm time displays, press [ ALARM ] key again to activate the alarm
function. Alarm off Alarm on
When clock reaches the alarm time, the alarm function will be trigered.
The alarm can be stopped by either of the following 4 operations
1. After 2 minutes of alarm the alarm will stop automatically while staying activated for the next day.
2. By pressing [SNOOZE / CONTRAST] key to enter snooze mode that will postpone the alarm by 5 minutes.
3. By holding [SNOOZE / CONTRAST] key for 2 seconds to stop the alarm and will activate again in the next day
4. By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the next day.
TEMPERATURE & HUMIDITY
The temperature and humidity reading are display on the outdoor and indoor / CH section.
If the reading is below the measurement range, it will show “LO”. If reading is above the measurement range,
it will show “HI”.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS5400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info