Manual Alecto WS-5300 (page 55 of 60) (English, German, Dutch, French)

708531

Zoom out

Zoom in

1/60

5. ALARM CLOCK

5.1 Introduction:

You may program an alarm (wake-up) time in the WS-5300.

You may then also enable a frost alert; when the outdoor temperature falls below -3°C, the wake-up signal

will sound 30 minutes before the set wake-up time.

5.2 To set the alarm time:

1. press and hold the button at the rear of the weather station for 2 seconds until the hour digits start

ashing

2. use / to set the hours and then briey press ; the minute digits start ashing

3. use / to set the minutes and then briey press ; the alarm time is now set

5.3 To set the alarm function:

1. press the button once or several times to check the alarm or to switch it on/o

Only “AL” appears: the time being displayed is the set alarm time, but the alarm itself is switched o

“AL” + “ ” illuminates: the alarm is switched on and the wake-up signal will sound at the set alarm time

“AL” + “ ” + “ ” appears: the frost alert is set

2. release the button, after several seconds the actual time is displayed and the alarm status, according

to the above description, remains visible

5.4 Operation:

• At the set time, the alarm will sound for up to 120 seconds

• For the rst 4 seconds, the alarm signal has a slow rhythm

• Between 4 and 8 seconds, the rhythm of the alarm signal increases

• Between 9 and 12 seconds, the rhythm of the alarm signal increases further

• After 13 seconds, the rhythm of the alarm signal is the fastest

• Press the button to stop the alarm signal beforehand OR press the SNOOZE button on top of the

weather station to enable the snooze function; the wake-alarm will then sound again after 5 minutes

• The alarm is repeated daily unless you disable it according to the above instructions.

• If you’ve enabled the frost alert “ ” and the outdoor temperature falls below -3°C, the wake-up signal will

sound 30 minutes earlier than the time you’ve set. If the outdoor temperature is above -3°C, the alarm

will sound at the set time.

6. HISTORY

6.1 Introduction:

The weather station of the WS-5300 automatically stores all measurement data of the past 24 hours to

allow you to check the trend of the past 24 hours at any moment

6.2 To view historic data:

1. press the HISTORY button, the most recently stored measurement data is shown in the display includ-

ing the time and date of the concerned data in the upper part of the display

2. repeatedly press the HISTORY button to scroll the memory

The data of the indoor and outdoor temperature and humidity, air pressure, wind chill, wind speed and

rainfall is saved in the history memory.

6.3 To delete historic data:

Press and hold the HISTORY button for 10 seconds to erase all measurement data up to that moment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-5300 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto WS-5300 Manual

Product: