627484
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
5. ALARM CLOCK
5.1 Introduction:
The WS-4800 allows you to program an alarm (wake-up) time.
You may also enable an ice alert for this wake-up function: when the outdoor temperature is below -3°C,
the alarm signal will sound 30 minutes before the time you’ve programmed.
5.2 Alarm time setup:
1. press and hold the button at the rear of the indoor for 2 seconds until the hour display starts
flashing
2. use / to set the hours, briefly press and the minute display starts flashing
3. use / to set the minutes and briefly press to store your alarm time
5.3 Alarm function setup:
1. repeatedly press the button to check/enable/disable the alarm
Only “AL” appears: the displayed time is the set alarm time, but the alarm itself is disabled
“AL” + “ appear: the alarm is enabled and the wake-up signal will sound at the set alarm time
“AL” + “ + “ appear: the ice alert is set
2. release the button; after several seconds the actual time will be displayed again and the alarm
status as mentioned above remains visible
5.4 Operation:
At the set moment of time, the alarm will sound for up to 120 seconds
Press the button to stop the alarm signal beforehand OR press the SNOOZE/LIGHT button on top
of the indoor unit to enable the snooze function; the wake-up alarm will sound again after 5 minutes.
The alarm is repeated daily until you disable it according to the above instructions.
When you enable the ice alert and outside it’s colder than -3°C, the wake-up signal will sound 30
minutes earlier than the alarm time you set. When it’s warmer than -3°C outside, the alarm will sound
at the set time.
6. HISTORY
6.1 Introduction:
The indoor unit of the WS-4800 automatically saves all measurement data of the past 24 hours, allowing
you to check the trend of the last 24 hours at any time
6.2 To view the history:
1. press the HISTORY button to show the last saved measurement data in the display, while the upper
part of the display shows the time and date of the concerned measurement
2. repeatedly press the HISTORY button to scroll the memory
The history memory saves the data of the indoor and outdoor temperature and humidity, air pressure,
wind chill, wind speed and rainfall.
6.3 To delete the history:
Press and hold the HISTORY button for 10 seconds to erase all measurement data up until that
moment.
7. MAX-MIN ALARM
7.1 Introduction:
For the following measurements you can set an alarm for when a maximum or minimum threshold is
exceeded:
Indoor temperature min/max alarm
Indoor humidity min/max alarm
outdoor temperature min/max alarm
outdoor humidity min/max alarm
Rainfall max alarm (only the actual rainfall from 00:00am is considered)
Wind speed max alarm
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-4800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-4800 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto WS-4800

Alecto WS-4800 User Manual - German - 16 pages

Alecto WS-4800 User Manual - Dutch - 16 pages

Alecto WS-4800 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info