794960
13
Zoom out
Zoom in
Previous page
1/56
Next page
13
8. MAINTENANCE
For easy access to the outdoor units
to carry out minor maintenance or
to replace the batteries
, it is advisable to place the outdoor units in an
accessible place, but still as far as possible in the wind or rain.
8.1 Rain meter:
The rain unit housing can be unclipped from the bottom center, and the
inside of the rain gauge can then be cleaned. Use a soft long-bristle
brush for this.
Clean the collection tray and remove any leaves. Place it back on
the rain gauge (note the 2 protruding tabs on the back) and press the
housing onto the rain gauge again until a mechanical "click" is heard.
See also 4.4 cleaning.
8.2 Outdoor temperature and humidity sensor:
Blow the openings of the sensor housing clean and use a long-bristle
soft brush to clean the rain slats. DO NOT use WATER but only a
damp cloth.
8.3 Wind vane and windmill scoops:
Wipe these parts with a slightly damp cloth.
Check that the bearings still rotate smoothly at the same time.
9. USE INDOOR UNIT WITH BATTERIES.
The indoor unit also runs on batteries without an adapter. This will then
run out faster than when using an adapter.
The display background will not illuminate, but when the buttons are
pressed the background lighting will come on for 5 seconds. The light
can then no longer be dimmed.
10. RECEPTION FUNCTION.
After installing the batteries and/or plugging in the power adapter
connected to the mains, the indoor unit will begin receiving signals

indoor unit will be seen as the correct outdoor unit and will remember
the code of the outdoor unit. Check that it is the correct outdoor unit.
After the 5 minutes, the indoor unit will stop receiving and will only
display the value of the outdoor unit received during this process.
To switch reception on again, press the channel key
S
for at least
󰀨
S
again for
2 seconds.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-3850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-3850 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info