794960
9
Zoom out
Zoom in
Previous page
1/56
Next page
9
6. SETTING INDOOR UNIT:
6.1 Mode:
Use the mode button to select the desired adjustment function:
Press Mode for the following settings
date and time
alarm time for the alarm clock
height correction setting
temperature alarm setting for outdoor and indoor temperature
rain gauge display extension in mm or inches
wind speed display extension in km/h or mph
6.2 Date and time:
The time and date are automatically received via DCF-77 receiver which
receives the time data. This receiver is situated in the wind unit. The wind
unit must be switched on for at least 5 minutes to receive the DCF-77
signal. If the channels of the wind unit and the indoor unit are the same,

registration. Followed later by the correct time. The wind unit must be
switched on for approximately 2 minutes for the signal to be transmitted.
Alternatively, you can use the TX button in the battery compartment to
transmit manually. The wind unit should already be switched on for several
minutes at this point. Once the DCF signal is received, the following icon will
appear next to the time: . If DST appears below this icon ( ) then daylight
saving time is active (DST - Day Saving Time).
A
TX
WAVE
1 2 3
Pressing the WAVE button for a few
seconds will disable reception of the
DCF signal. Then wait a day and the
DCF-77 receive symbol will disappear.
It is also possible to restart the indoor
unit. The receive symbol will then also
not appear. The time and date must then be re-set manually.
zone
press the Mode key 1 x . Date and time setting is displayed
Press the Set key for 3 seconds

zone using the up and down keys. (In the DCF time zone of the
Netherlands this is 0) The DCF time takes daylight saving time into
account.
day name language
Press the Set key again to continue setting the day in English,
German, French, Italian, Dutch, Spanish or Danish. Select the desired
language with up and down keys.
year
Press the Set key again to continue setting the year. Select the
desired year with the up and down keys.
month-day / day month sequence
Press the Set key again to continue setting the day or month
sequence. Select the desired month-day or day-month indication with
up and down keys.
month
Press the Set key again to continue setting the desired month
(1-2-3..to..12). Select the desired year with the up and down
keys the desired month indication.
day
Press the Set key again to continue setting the desired day
(1-2-3..to..31). Select the desired day with the up and down
keys.
12/24 hour display
Press the Set key again to continue setting the desired hour format
(12 or 24 hours). Select the desired hour format with the up and
down keys.
hour
Press the Set key again to continue setting the desired hour Select
the desired hour with the up and down keys.
minutes
Press the Set key again to continue setting the desired minutes.
Select the desired minutes with the up and down keys.
seconds
Press the Set key again to continue setting the desired seconds.
Select the desired seconds with the up and down keys.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-3850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-3850 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info