708524

Alecto WS-3300 Manual

40
Zoom out
Zoom in
Previous page
1/42
Next page
40
Wind Direction:
The wind direction is indicated in the compass card. If the outdoor wind sensor is installed correctly the wind
direction is indicated (see 3.2 To set the wind meter).
Wind Chill:
On cold days and windy days it’s not the temperature that makes it cold, but the combination of the amount
of wind and the temperature. When the outdoor temperature falls below 10°C and the wind speed is above
4.8 Km/h, the wind chill is indicated. The display shows “--.- °C” outside this value.
6.8 RAIN MEASUREMENTS:
The display shows the following rain measurements:
MOON PHASE
MODE / SET
WIND DIRECTION
RAIN HISTORY
/
Total:
This shows the total amount of rainfall from the beginning (last reset or battery placement) until now.
Press the “RAIN SINCE” (34) button to check the starting date.
The date will be shown instead of the clock.
Today:
This shows the rainfall of today (the last 24 hours).
Rain History:
Press the “RAIN HISTORY” (27) button to view the rainfall history up to 30 days ago. The history disap-
pears from the display after 15 seconds without pressing any button.
To delete the rainfall data:
Press and hold the “RAIN CLEAR” (34) button for 2 seconds to delete the rainfall data.
Rainfall alert function:
When a certain amount of rain has fallen, the weather station can be set to emit an acoustic alert signal.
To set the rainfall alert:
Press and hold the “RAIN ALERT” (37) button for at least 2 seconds.
“HI▼ and ▲ buttons to select the desired rainfall alert level and press the “RAIN
ALERT
Press the “RAIN ALERT” (37) button to activate or deactivate the rainfall alert (“HI” appears in the display
when the rainfall alert is enabled).
The alert starts as soon as the rainfall level is reached.
Press any button to stop the alert (the “HI
6.9 TEMPERATURE:
Indoor and Outdoor TEMP:
Indoor and outdoor temperature with humidity (when the humidity is below 20%, the ▼ icon appears). The
display shows LL.L or HH.H when the temperature is outside the value that can be measured.
Outdoor temperature alert function:
When the outdoor temperature becomes Higher or Lower than certain values, the weather station can be set
to emit an acoustic alert signal.
This can be set for when the temperature falls below a certain value.
When the temperature rises to above a certain value.
When the temperature is below and above a certain value.
To set the temperature alert:
Press and hold the “OUT TEMP ALERT” (39) button for at least 2 seconds.
“HI▼ and ▲ buttons to select the desired high temperature alert and then press
the “OUT TEMP ALERT” (39) button.
“LO▼ and ▲ buttons to select the desired low temperature alert and then press
the “OUT TEMP ALERT” (39) button to save your settings.
… 40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-3300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-3300 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info