708520
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
INSTALLATION
Indoor unit power supply:
Connect the supplied 4.5VDC power
adaptor (A) or insert the batteries according
to the instructions below:
1. Open the battery compartment of the
indoor unit by carefully pushing the
retaining clip at the rear downward (1).
2. Remove the battery cover and insert 3
batteries, type alkaline, size AA, 1.5V
(2), paying attention to the polarity.
Batteries are not included.
3. Click the battery cover back onto the
weather station.
As soon as the indoor unit starts up, the
weather icons start ashing in the display.
1. Press the UP and DOWN (11 and
12) buttons to select the icon for the
actual weather conditions. See also
‘WEATHER FORECAST’.
2. Press the “CLOCK” (16) button to
conrm your selection.
Now the reception icon for the outdoor units
starts ashing, while the receiver for the
outdoor units starts receiving.
Outdoor unit power supply (D):
1. Open the battery compartment by
sliding the cover at the front downward.
2.
Insert 2 batteries, type AAA, 1.5 Volt, as
indicated inside the battery compartment
(D8). Batteries are not included.
3. Press the TX (7) button to register the
outdoor unit. Upon leaving the factory,
the outdoor unit is set to channel 1 (9).
4. Replace the battery cover onto the
outdoor unit.
Now press and hold the Channel button
(15) for 3 seconds to start the reception of
the DCF-77 clock signal; the
icon (25)
starts ashing. The number of arcs shown in
the icon depends on how strong the signal
reception is.
The receiver operates for 10 minutes and
the unit then switches back to the reception
of the outdoor unit.
Attention:
Alkaline batteries will power the WS-
1550 approx. 4 months; that’s why it’s
recommended to power the WS-1550 using
the power adaptor and to insert the batteries
only as a backup.
Positioning tips:
Never place the indoor unit in direct
sunlight and keep it away from heat
radiating objects (lights, heaters, etc.)
For a strong reception of the radio
controlled time signals, never place the
indoor unit next to large metal surfaces
or devices with strong electromagnetic
elds.
The outdoor unit is not waterproof. Al-
ways place this unit on a spot protected
against rain and wind.
The distance between the indoor and
outdoor unit should be no more than
30 meters
Mounting:
In case of wall-mounting, the indoor and out-
door unit may be suspended from a single
screw (see B5 and C5).
DISPLAYS (see g. F)
General:
The actual indoor temperature with the hu-
midity, the actual outdoor temperature with
the humidity and the time are only displayed
correctly after both the indoor and outdoor
unit have been functional for several hours
and have not been moved. The weather
forecast will be displayed correctly after at
least 24 hours.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-1550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-1550 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info