533833
40
Zoom out
Zoom in
Previous page
1/44
Next page
-40-
Press the “MIN/MAX” button again or press no buttons for 10 seconds to
exit the max/min display mode.
Deleting minimum and maximum values:
Use the “MIN/MAX” button to go to the data you’d like to delete.
Now press and hold the “MIN/MAX” button for at least 3 seconds until the
value changes into the actual value. The minimum and maximum registration
of the concerned value will now be reset.
Setting the alarm clock:
The WS-1100 is provided with an alarm clock, after setup you can activate
one wake-up time. As soon as the set time is reached, the alarm will sound.
Press and hold the “ALARM” button for at least 3 seconds until the hours
of the alarm time start ashing.
Press the “+” or “-” button to set the correct hours.
Press the “ALARM” button to set the minutes.
Press the “+” or “-” button to set the correct minutes.
Press the “ALARM” button or wait for 10 seconds to leave the
programming mode.
Activating and deactivating the alarm:
Press the “ALARM” button to switch between alarm o󰀨 ( ) or the
alarm time ( ).
Press any button to stop the alarm.
The alarm will be repeated after 24 hours unless turned o󰀨.
Battery capacity indication:
When the battery of the indoor unit starts running low and the capacity
becomes insu󰀩cient, the icon will appear. Please replace the batteries
when this icon is displayed.
When the battery of the outdoor unit starts running low and the capacity
becomes insu󰀩cient, the icon will appear. Please replace the batteries
when this icon is displayed.
POSITIONING TIPS
Never place the indoor unit in direct sunlight and keep it away from heat
generating objects (lights, heaters, etc.)
For a strong reception of the radio controlled time signals, never place
the transmitting unit next to large metal surfaces or devices with strong
electromagnetic elds.
The e󰀨ective range between the outdoor unit and indoor unit can vary
depending on local circumstances. Please check whether the connection
between the units remains established before xing the outdoor unit in a
permanent spot.
The range between the indoor and outdoor unit may not be over
50 meters.
40


Need help? Post your question in this forum.

Forumrules
1

Forum

alecto-ws-1100

Reset search

  • Hi, any of you have had problems with the pressure values settings? Submitted on 7-12-2019 at 20:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS 1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS 1100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto WS 1100

Alecto WS 1100 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info