Manual Alecto TM 36 (page 20 of 29) (Dutch, French)

97519

Zoom out

Zoom in

1/29

CAPACITANCE (TM-56 only).

Short the leads of the capacitor to be tested to insure that there is no

charge left on the capacitor

1. Set the rotary switch to one of the capacitance (F) positions.

2. Insert the capacitor leads into the capacitor test sockets.

3. Read the capacitance value on the display.

Capacitors are tested with an AC voltage of 40mVrms / 400Hz.

FREQUENCY (TM-56 only).

1. Connect the red test lead to the V/

Ω

/Hz input jack and the black test lead to the COM

jack.

2. Set the rotary switch into position 20KHz.

3. Connect the test leads to the device or circuit being measured and read the

frequency.

The input sensitivity is 100mV. The max input level for an accurate reading is 30Vp-p.

TEMPERATURE (TM-56 only).

1. Connect the temperature probe to the TEMP jack

2. Set the rotary switch to position °C

3. Read the temperature on the display in °C

The unit is °C, the range is -20°C to +1000°C, wait until the readout is stable.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto TM 36 in the language / languages: Dutch, French as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto TM 36 Manual

Product: