Manual Alecto TM 16 (page 15 of 23) (English, German, Dutch, French)

97569

Zoom out

Zoom in

1/23

Be aware that the meter only shows whether the diode

conducts or blocks; there is no indication concerning the quality

of the diode.

TRANSISTOR hFe MEASUREMENT:

1. Set the selector switch to hFe.

2. Insert the transistor in the transistorsocket on the TM-16

using the correct connections for E(mitter), C(ollector)

and B(ase) and for NPN or PNP versions

3. Read the hFe (beta or DC current gain) in the display.

BATTERY / FUSE REPLACEMENT

An almost empty battery is indicated by a battery-low warning

on the display. A defective fuse is noticeable by a constant

readout of 000 (or '1' in case a resistance range is selected).

1. Before attemping to replace the battery or fuse,

disconnect the test leads from any energized circuit to

avoid shock hazard.

2. Remove the two screws in the bottom of the case and

remove the plastic cover.

3A. Battery: replace the battery for a fresh 9V battery,

preferably an alkaline version.

3B. Fuse: replace the fuse for a 250 Volt / 0.2 A/ F executi-

on.

4. Replace the plastic cover and close the TM-16.

Remark: Never throw away empty batteries but

hand them over to your local depot for chemical

waste.

How do I test a 12volt battery to see when it's full or not? Submitted on 25-5-2020 at 13:26
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto TM 16 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto TM 16 Manual

Product: