Manual Alecto SMARTCOA10 (page 50 of 56) (English, German, Dutch, French)

794835

Zoom out

Zoom in

1/56

INSTALLATION:

1. Install the mounting plate on a suitable spot

2. Use the included plugs and screws.

3. Now install the detector onto the mounting place and press the detector

down until correctly fastened.

4. The green LED will now blink 6 times to indicate the device is starting.

After this, the green and yellow LED will blink alternately. This is the

warm-up period. This will take 100 seconds.

5. See the installation manual to register the CO detector to the Alecto

SMART-BRIDGE10 and the Smartlife-App.

USE:

1. Every 30 seconds , the green “POWER” LED will ﬂash to indicate the

detector is working.

2. When the detector emits a short beep tone every minute, you should

replace the batteries as soon as possible. When these warnings start,

the detector will continue to function correctly for at least 7 days.

- The table below shows when the detector will sound the alarm.

CO concentration NO ALARM

for

ALARM

for

33PPM 120 min. -

55PPM 60 min. 90 min.

110PPM 10 min. 40 min.

330PPM - 3 min.

In accordance to the EN50291 standard.

3. When the alarm sounds, it will turn off within 6 seconds after moving

the detector to a space with a CO concentration below 40PPM.

4. The alarm sound can be turned off by pressing the button (<150PPM).

5. Every 30 seconds, the detector will automatically perform an error

check.

SMARTCOA10-mainmanual-NL-FR-DE-EN-V1.1.indd 50SMARTCOA10-mainmanual-NL-FR-DE-EN-V1.1.indd 50 09/12/2020 11:03:4909/12/2020 11:03:49

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto SMARTCOA10 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto SMARTCOA10 Manual

Product: