707369

Alecto SCA-02 Manual

12
Zoom out
Zoom in
Previous page
1/18
Next page
INSTALLATION INFORMATION:
Attach the ceiling plate using the included plugs and screws to the ceiling on a location
of choice. Wall mounting is not recommended for smoke detection. Put the 9V block
battery in the smoke detector. Then put the detector to the ceiling plate and, twist
clockwise to lock it in place. Perform a first test by holding the test key for two seconds.
Also see the paragraph: “Testing”.
USING, TESTING AND MAINTENANCE:
Using:
The smoke detector works if the 9V battery has been placed and the SA-19/1 has
been mounted to the ceiling. The unit can only be mounted to the plate if the battery
has been installed. The LED underneath the test button will now flash ± every 45 se-
conds. Once smoke is detected, the alarm will sound. Once the smoke disappears, the
smoke alarm will stop automatically
Time-out function:
With this function the sensitivity of the alarm is reduced for about 10 minutes. This
function can be switched on by pressing the “TEST/HUSH” button once. The sensitivity
of the smoke detector is automatically reduced and the indicator light will briefly light
up ± every 10 seconds to indicate that the sound is temporarily muted. The alarm is re-
activated after 10 minutes. If there is still smoke, the alarm sound will be heard again.
This function can be used repeatedly.
Test:
Hold the test key for at least 2 seconds. The operation is still correct if you hear 2 or
three signal tones. Check the smoke detectors weekly. In alarm status the smoke de-
tector will generate about 85dB(A). Do not use candles, open fire or cigarettes to test
the smoke detector.
ATTENTION:
• If the cause of an alarm is unclear, assume it’s caused by fire. Immediately
evacuate the building.
• Keep the smoke detectors out of range of children.
• Protect against dust during rennovations. Without protection the smoke
detectors will lose their functionality.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto SCA-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto SCA-02 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info