Manual Alecto SA20 (page 11 of 19) (English, German, Dutch, French, Spanish)

794844

Zoom out

Zoom in

1/19

EN The SA20 is a smoke detector set for discovery of re in the rst stage. If smoke

develops, the SA20 will give a loud beep of at least 85dB (A). As part of the link

function all the smoke alarms within range will sound the alarm. We advice to test the

smoke detectors weekly using the test button on the detectors. Save this manual in a safe place

or inside of the electricity meter cupboard.

RECOMMENDED INSTALLATION LOCATIONS FOR THE SA20:

• Install the rst smoke detector near the bedroom. Ensure that it is placed so, if it would

detect re, at least one exit route would still be accessible. We recommend to place one

alarm near each potential blockade of your exit route, so you are alerted before a re would

block off escape.

• Use multiple smoke detectors to increase safety and ensure an alert before the escape route is

blocked.

• Install at least one smoke detector on each oor of your house.

• Install at least one smoke detector in each room where people smoke or where there is equip-

ment that may potentially cause a re.

• Smoke and heat will rst move upwards towards the ceiling; after that the smoke and

heat will travel horizontally.

• Install the detector on the ceiling. Except for rooms smaller than 1m, you should stay

at least 50 cm away from the wall and 60cm from any corner. Smoke and heat do not

gather in such corners, preventing the detector from alerting you on time.

DO NOT INSTALL IN THE FOLLOWING LOCATIONS:

• The kitchen; Steam from cooking might give a false alarm.

• The shower or bathroom; water damp might cause a false alarm and the moist environ-

ment might damage the detector.

• The garage: The car exhaust might cause a false alarm.

• In front of a fan or nearby the exhaust of an air conditioner or heater.

• In a ceiling nook.

• In rooms where the temperature could reach below 0°C or beyond 40°C.

• Do not paint or otherwise cover this smoke detector.

INSTALLATION INFORMATION:

Attach the ceiling plate using the included plugs and screws to the ceiling on a location of

choice. Wall mounting is not recommended for smoke detection. Put the 9V block battery in

the smoke detector. Then put the detector to the ceiling plate and, twist clockwise to lock it

in place. Perform a rst test by holding the test key for 3 seconds. Also see the paragraph:

“Testing”.

not in this area

near this space

Pas de cette

salle

61 cm minimum

dead air space

ROOKMELDERS

Fire

extinguishers Fire

blankets

Required

Do not use

ALSO AVAILABLE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto SA20 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto SA20 Manual

Product: