Manual Alecto SA-300 (page 12 of 18) (English, German, Dutch, French, Spanish)

707186

Zoom out

Zoom in

1/18

INSTALLATION INFORMATION:

Attach the ceiling plate using the included plugs and screws to the ceiling on a location

of choice. Wall mounting is not recommended for smoke detection. Then put the de-

tector to the ceiling plate and, twist clockwise to lock it in place. It will emit a beep and

be ready for use. Perform a ﬁrst test by holding the key for three seconds. Also see the

paragraph: “Testing”.

USING, TESTING AND MAINTENANCE:

Using:

The smoke detector works if the smoke detector has been mounted to the ceiling.

A red LED will light up and the smoke detector will beep brieﬂy to let you know that it

has been activated, because the ceiling plate has switched a lever on the inside.

The red LED will now ﬂash every 40 seconds. Once smoke is detected, the alarm will

sound. Once the smoke disappears, the smoke alarm will stop automatically.

Test:

Hold the button for at least 3 seconds. The operation is still correct if you hear 2 or

three signal tones. Check the smoke detectors weekly. In alarm status the smoke de-

tector will generate about 85dB(A). Do not use candles, open ﬁre or cigarettes to test

the smoke detector.

Time-out function:

This function will deactivate the alarm for about 5 minutes. This function can be

enabled by pushing the HUSH/TEST button very shortly. The LED will now blink once

every 8 seconds to indicate the deactivated smoke alarm.

After 5 minutes, the alarm will be fully active once again. If there is (still) any smoke in

the environment, the alarm will go off again.

This function can be used repeatedly.

Ceiling

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto SA-300 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto SA-300 Manual

Product: