97578

Alecto Pax 120 Manual

18
Zoom out
Zoom in
Previous page
1/28
Next page
18
INSTALLATION
ATTENTION
Make sure the ventilation openings at the top and bottom of the amplifier remain clear
to guarantee a continuous convection.
During installation, set the POWER switch of the amplifier to OFF (0) and set the MIC-
1, 2 & 3 controls and the AUX-1 & 2 controls to minimum (0); do not connect the power
supply yet.
INPUT
MICROPHONE:
MIC1 input is either a standard 1/4" mono jack on front panel or XLR and DIN on the
rear panel (with selectable phantom power).
XLR (balanced operation)
Pin 1 = ground (GND)
Pin 2 = signal live
Pin 3 = signal return
1/4” stereo Jack (balanced operation (backside only)*
Pin 1 = ground (GND)
Pin 2 = signal live
Pin 3 = signal return
DIN (balanced operation)
Pin 1 = Signal live
Pin 2 = ground (GND)
Pin 3 = Signaal -
Pin 4 = CHIME
Pin 5 = GND
*: the frontside 1/4” jack is a standard mono version
MIC1 input has VOX priority which will override MIC2 / MIC3 and AUX1 / AUX2 input
signals but NOT the TEL/EMER input.
MIC1-3 input are XLR, DIN and phone jack with selectable phantom power located on
the rear panel and wired as above. The phantom power is factory set to off and can be
enabled as follow:
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto Pax 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto Pax 120 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info