548902
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
Join Home AP: (only available when using an internal Wi-Fi network connection)
When you open this menu all the Wi-Fi access points will appear on the screen.
Choose your own Wi-Fi network and log in with the correct password for the network.
Now change the camera from pairing mode to link mode using the switch located on the back of the
camera. Now you can use your own network to connect to the camera.
Camera Setting: (only available when using an internal Wi-Fi network connection)
The frame rate and resolution of the image can be adjusted in this menu.
The frame rate can be set to 15fps (15 frames per second) or 25fps (25 frames per second). 25fps
gives a smoother image but has a larger bandwidth.
The resolution of the image can be set as QVGA (320 x 240) or VGA (640 x 480). VGA provides a
picture with more pixels but has a greater bandwidth.
Noti cation settings:
In this menu you are able to set up the alert and noti cation messages. There are two types of alarms
that can be set up, the rst is if the room temperature goes below a certain level, and is if the sound
indicator of the camera picks up sound over a certain volume.
Temperature Detection:
The low and high temperature limits can be set separately from each other.
If the temperature goes outside of these limits then an alarm noti cation will be sent.
The option to send a noti cation should be enabled (see paragraph 2.2).
You can set how often an alert message is sent (3-60sec.) during the alarm period.
If the trigger time is set to 29sec. then an alarm noti cation will be sent every 29 sec. during the alarm
period.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto IVM-180 smart ios at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto IVM-180 smart ios in the language / languages: English as an attachment in your email.

The manual is 1.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto IVM-180 smart ios

Alecto IVM-180 smart ios User Manual - German - 20 pages

Alecto IVM-180 smart ios User Manual - Dutch - 20 pages

Alecto IVM-180 smart ios User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info